|
|
RLD
Uncle Ray
Joined: 18 Jul 2005
Location: lancs
Posts: 3418
 
|
you need a nana nana mount  is it me your looking for i am back now but for how long is anybody's guess
|
 Fri Sep 05 2008 12:33pm |
|
|
MacLeod 313
Joined: 18 Apr 2008
Location: East Sussex
Posts: 1697
|
Dashmount.co.uk make a very small and strong bracket for the D3, all you need to do is find the mount or just velcro it. Look in my Gallery, I fitted my Parrot handfree kit with one of these, just remove the trim and it srews in with the stereo torque screws. PERMANENTLY IN THE SITE NAUGHTY CORNER
|
| Fri Sep 05 2008 1:23pm |
|
|
|
|
MacLeod 313
Joined: 18 Apr 2008
Location: East Sussex
Posts: 1697
|
Nope, cos i fitted mine lower down than yours, I saw yours in the Gallery. Mine is on my Gallery, opted to go low as the Parrot is'nt removable and wanted it lower so the ASBO, cider drinking,  find it harder to see.
Funny on Dashmount.co.uk site shows it in your place, but needs the hole made bigger, fit it lower like mine and no mods needed.
By far still a great little bracket, and very strong PERMANENTLY IN THE SITE NAUGHTY CORNER
|
| Fri Sep 05 2008 3:11pm |
|
|
simoniz
Joined: 28 Oct 2007
Location: Merthyr Tydfil
Posts: 257
 
|
M8 easiest solution is get a 5 in 1 FM transmitter/charger/holder which will plug straight into left hand power socket on centre console & will give you connectivity to incar audio and keep the little blighter powered up. I have had one in my D3 for ipod & Iphone for 2 yrs+ and it works a dream,as nano is lighter it should sit well without any hassle.It also has a USB connector & 3mm jack input so other devices can be plugged into it. Best of all it does not cost a packet!!!.
Give it a go - everything to gain,little money to lose(if at all!!!)
|
| Fri Sep 05 2008 4:46pm |
|
|
|
|
simoniz
Joined: 28 Oct 2007
Location: Merthyr Tydfil
Posts: 257
|
Dom
Check out www.island-electronics.com for the 5 in 1 FM solution - its a good solution trust me and not a load of cash!!!
|
| Fri Sep 05 2008 5:30pm |
|
|
|
|
Bornidle
Joined: 14 Aug 2008
Location: Parked Up
Posts: 213
|
Bodsy wrote:JCB, did your dashnount fit OK with no mods?
I bouight one for my iphone & I needed to drill the bottom hole out a bit more to fit over the plastic lug. Most annoying. Also needed a longer screw!!!
i installed teh same dash mount (see my gallery) no drilling or longer screw required 
does need a little bend to make the H trim fit snug If at first you don't succeed
skydiving is not for you.
|
| Fri Sep 05 2008 5:35pm |
|
|
simoniz
Joined: 28 Oct 2007
Location: Merthyr Tydfil
Posts: 257
|
Slimer - yes but it don't want it stuck in the glovebox?
|
| Fri Sep 05 2008 5:37pm |
|
|
Bornidle
Joined: 14 Aug 2008
Location: Parked Up
Posts: 213
|
you need this then
 | | Click image to enlarge |
If at first you don't succeed
skydiving is not for you.
|
| Fri Sep 05 2008 5:40pm |
|
|
Bornidle
Joined: 14 Aug 2008
Location: Parked Up
Posts: 213
|
and if its an iphone dont buy the more expensive holder that goes on the dash mount as the itouch one is cheaper and does BOTH iphone and itouch , i think you said ya had a nano .. o well infos here for anyone looking 
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...0278737248 If at first you don't succeed
skydiving is not for you.
|
| Fri Sep 05 2008 5:43pm |
|
|
shiny moose
Joined: 12 Nov 2007
Location: In the middle somewhere
Posts: 1579
 
|
I made this mount up, it uses the Belkin connector, the i pod one is better I would think. This is stuck with the double sided number plate tape to a piece of ally 75mm x 20mm painted black (the hole was for a previous mount), it is screw into the plastic but cannot be seen as it's hidden behind the pen tray.
The Nano is only held on the the connector, but rest against the upright of the mount allowing the track change etc to be pressed
If you want to see more I'll take some pictures in the light tomorrow. Silver TDV6 S with sat nav, PTI and Moosed up a bit
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you heard is not what I meant"
|
| Fri Sep 05 2008 10:22pm |
|
|
Sturge
Joined: 02 Nov 2005
Location: Worthing
Posts: 338
|
You could get one of these from dashmount and add it to the D3 bracket - i did something similar years ago with a bracket from them for a pda in my old V70 volvo
http://shop.dashmount.co.uk/ipod/ipodholder.asp
|
| Sat Sep 06 2008 7:43am |
|
|
