Member Since: 02 Dec 2005
Location: A fun place
Posts: 485
Stopping on snow/ice
How do you guy's stop the DIII on slipery roads?
I tried the usual way and let the ABS work. As with all other cars I drove with ABS it was disapointing, and find ABS only fine if you need to steer while hitting the breaks.
I also tried to shift down and let ETC do his work, and was happy to find out it works better then hitting the breaks.In a time of chimpanzees, I was a penguin.
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Best advice it to ensure your running speed is low enough so you don't need to touch the brakes but can use engine braking instead, use the brakes as a last resort or to bring her to a halt after using engine breaking.
Stroke the brakes to keep the vehicle under control. Slow down early and don't swing the D3 round corners.
Use light throttle on corners (and I mean light) try not to coast.
All ABS will do is avoid wheel lock up and allow you to steer (if you have traction that is). It will help to reduce your stopping distance but may well increase it, snow cannot build up in front of the wheels which can assist in slowing you down.
Tread Carefully is the rule.
Never think your invincible because you have a 4x4. The laws of physics still apply !
-s
30th Dec 2005 11:30 am
JAY
Member Since: 28 Sep 2005
Location: Herefordshire
Posts: 28
Agree with the sentiment regarding engine braking as being the best method of retaining control. However, my car tends to disengage drive when the throttle is lifted at low speeds and so I don't have any engine braking. Worse when Cold (happens up to 25mph) but even when warm happens up to around 15-20mph... Reapplying power then leads to thunk as pick up is not smooth (issue noted elsewhere on the site). Been told that this is all a "characteristic" of the auto box. Led to some hairy moments on country lanes covered in ice this week...
26th Jan 2006 3:03 pm
AndrewS Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10438
ABS breaks I have asked for mine to be turned of in previous Disco’s but got told its not possible, and I know its part of the traction control ect.
The safest way to control your speed in mud or snow is to engage hill descent.
That’s what Land Rover told me! In the Beginning there was nothing, which exploded.
26th Jan 2006 3:23 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Jay,
Mines a manual so have engine breaking at my finger tips... does the auto in manual override not give you the same control ?
Also remember that too much engine breaking will cause you to slide too.
-s
26th Jan 2006 3:24 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
... or dial into the 'grass gravel snow' setting, this should help with the torque converter disengaging
26th Jan 2006 3:24 pm
AndrewS Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10438
10forcash wrote:
... or dial into the 'grass gravel snow' setting, this should help with the torque converter disengaging
Tried that it helps but not as good as a load of snow or mud pilling up in front of your tyres.
If you are on a steep down hill approaching a give way I would engage hill decent to kill speed.In the Beginning there was nothing, which exploded.
26th Jan 2006 3:43 pm
simon.foster
Member Since: 11 Apr 2005
Location: Wakefield
Posts: 110
Ronnie Dale of Skipton Land Rover Experience showed me that if you are heading somewhere with limited breaking because of ABS then turning off the engine kills the ABS. It is quite dramatic but it worked!!! Emergencies only I think.Disco 3 TDV6HSE Cairns blue auto
Defender 90 300TDi 1997
26th Jan 2006 8:11 pm
JAY
Member Since: 28 Sep 2005
Location: Herefordshire
Posts: 28
Manual command shift doesn't really add much in normal TR mode in my car (There is a problem with the programming with the auto in my car anyhow) Switching to grass / snow does help but this is a pain to do every time you think you might encounter ice on a back road as obviously it alters other settings too like throttle response. Perhaps by software release 50+ the box programming may be sorted out
26th Jan 2006 8:22 pm
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
Re: Stopping on snow/ice
Penguin wrote:
How do you guy's stop the DIII on slipery roads?
I tried the usual way and let the ABS work. As with all other cars I drove with ABS it was disapointing, and find ABS only fine if you need to steer while hitting the breaks.
I also tried to shift down and let ETC do his work, and was happy to find out it works better then hitting the breaks.
ABS with 2.7 tonnes will take for ever to stop if at all. In ice and snow, the eyes and brain with very moderate speed are the best defences. Mechanical devices are basically useless and brakes should never be used.
ABS was designed to assist steering not braking and was developed in 1936 as Aircraft Braking System. It was later developed by BMW, Ford and Mercedes for cars. Commonly called Antilock Braking System or Antiblock in east europe. This was a bad name and should have been called Steering Assist System.
26th Jan 2006 8:44 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18457
On topic interest is the VW Golf test data by the Finnish magazine. Have a look 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
26th Jan 2006 8:50 pm
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
Yes, but I didn't need to look at that boss, been teaching it for years and demoing it on trucks for the last 10 years with the oil companies. I was spot on though wasn't I even with the 'antiblock'
Just think that when you are driving a car, you have 4 size 44 (metric) mens shoe soles on the ground. That is not a lot of contact with the ground. Therefore if you cannot stand on ice, how do you think you can stop at any speed over 5 MPH ?
26th Jan 2006 9:04 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26705
I thought Aston Martin developed the first automotive Anti lock brake for the DB5? If I remember correctly it was a Dunlop system branded the "Maxaret" system. All hydraulicly operated and utilising the momentum in a small flywheel to sense the wheel decellerating to quickly.
A similar system, but on a larger scale was also used on the De-havilland Comet 4, and is still in use today on the RAF AVRO Nimrod MR2.
26th Jan 2006 9:38 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26705
Ah, just read your link Martin, nearly right! Jensen is nearly Aston is'nt it
26th Jan 2006 9:40 pm
Wineman
Member Since: 25 Jan 2005
Location: UK/France
Posts: 103
Back on the topic...had the experience of driving on pure ice over New Year at Disneyland Paris! Came back to the car in the afternoon and the car was covered in a thick layer of ice. Needed to use the kids push chair to stop falling over myself. It took at least 20mins for the car to melt the ice of front and back windshield. Anyway, engaged mud/snow and was amazed how much traction I had on my 19in Scropions. Likewise, breaking was not a good idea. As long as I used engine breaking I had complete control and confidence. Was able to pass every other vehicle on the road including a Toureg which was slipping everywhich way!2017 Disco5 First Edition(On Order)
2013 Disco4 HSE Luxury
2012 Disco4 HSE
2005 Disco03 TDV6 HSE
2002 Disco02 TD5 ES
1987 Defender 90(MOD)
2002 Fendt 180 Tractor
1950 Massey Ferguson Tractor
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum