EDIT , Here is a few pictures on my car on the dyno only a few days agao doing some more fuel quality tests.
Last edited by bellautos on 11th Jan 2010 10:55 pm. Edited 4 times in total
4th Jan 2009 6:29 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Is that with just 1 map ...or 2 ?G4 Gone ...but not forgotten
4th Jan 2009 6:33 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
I can supply 2 stages of mapping if you realy wanted,
In honesty its not needed but i can make one stronger than the other or one with speed limiter on and one not etc etc.
Regards Pete
Last edited by bellautos on 4th Jan 2009 10:35 pm. Edited 2 times in total
4th Jan 2009 6:38 pm
Ent
Member Since: 12 Oct 2007
Location: In the cack
Posts: 6485
wiggs wrote:
Is that with just 1 map ...or 2 ?
Do it!Club Exped trailer
Club Timed Climate
Club Flappy paddle steering wheel
Club 300bhp
Club Prospeed test pilot/lab rat
Club National Luna Stella conditioner
4th Jan 2009 9:58 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Hi Bellautos. I'm quite interseted in this for my Disco3 TDV6. Would you be able to explain more for me what this will help do for my Disco? Also I'm willing to pop in and see you sometime at your shop as i'm close!
Thanks in advance! Jase
5th Jan 2009 1:46 am
Reggieb
Member Since: 13 Sep 2007
Location: Watford, Herts.
Posts: 707
Welcome to the forum Discojase, good of you to jump on this one as a first post
Seriously though, don't be shy and say hello on the link below...
Pete, a great deal... TDV6 HSE - Light Guards - White Reflective Sticker
Club--Engel
Club--Satnav on the move (Thanks Pete)
Club--Kumho KL71 (265/70 17) they kick!
Club--Three Musketeers
Club--GNVP Sump Guard (The nuts)
Disco3Club
Never take life seriously. Nobody gets out alive anyway.
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
DISCOJASE wrote:
Hi Bellautos. I'm quite interseted in this for my Disco3 TDV6. Would you be able to explain more for me what this will help do for my Disco? Also I'm willing to pop in and see you sometime at your shop as i'm close!
Thanks in advance! Jase
Hello DISCOJASE welcome to the forum.
The BAS interface part its self is a tool that will let you read/write the mapping content of your engine control unit. Handy if your are wanting tuning but are scared of taking it to your dealers stuill tuned !!
It will also read/clear the generic EOBD2 fault codes from your engine management stystem.
The peformance mapping that comes as part of the tool is exactly what it says on the tin, performance tuning for your engine.
The stages of tune vary from the lowest tune of 38bhp and 88Nm of torque upto +50bhp , i am however a strong beliver in economy and reliability so prefer not to tune to the maximium where possibile.
My tuning is a very smooth power delivery from around 1200 upto 3600 rpm,
Regards Pete
5th Jan 2009 10:10 am
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
When you say generic EOBD codes, will it also work on other cars for this (obviously not the map part but the error reading). I am guessing it won't read anything more than basic engine codes etc not specific D3 codes for additional systems (not being critical just that I wanted to clarify it won't).
Sounds like a very useful tool.
5th Jan 2009 10:25 am
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
Here is some feedback thats just been posted from one of my previous customers that have got the BAS interface.
Last edited by bellautos on 5th Jan 2009 12:12 pm. Edited 1 time in total
5th Jan 2009 11:21 am
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
countrywide wrote:
When you say generic EOBD codes, will it also work on other cars for this (obviously not the map part but the error reading). I am guessing it won't read anything more than basic engine codes etc not specific D3 codes for additional systems (not being critical just that I wanted to clarify it won't).
Sounds like a very useful tool.
Yes in theory it should work on all EOBD2 systmes engine codes,it will read all codes that are stored in the engine management system car spacific or not, it wont read live date logs.
Regards Pete
5th Jan 2009 11:33 am
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
Sounds like a good bit of kit, I will PM you.
5th Jan 2009 11:52 am
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
