| Home · FAQ · New Posts · Private Messages · Search · Members · Members Map · Calendar · Groups · Profile · Donate · Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
- If you have a DISCO3.CO.UK account you do not need to re-register, just Log In as normal
kevin-t
Member Since: 12 Nov 2007
Location: sheffield
Posts: 161
  
|
| OZ TENT FITTING TO G4 ROOFRACK |
|
Hi Guys,
This might have been asked before or posted, however i cannot find so here goes.
Does anyone that has the G4 type roofrack, know if an oz tent fits up there???
I have the tent, and bars with box. However would like a roofrack only if the tent will fit.
Thanks in advance.............
Kevin-T..........................................
|
 Sat Jun 06 2009 3:09pm |
|
|
DaveT
Member Since: 01 Aug 2005
Location: Cornwall
Posts: 1268
|
I believe the oz only fits on top of the G4 rack, which means you need the front crossbar that only comes with the G4 (not expo) rack. ie the Oz is too long to fit on the load floor of the G4 rack.
I carry mine on crossbars, using the lashing eyes from the G4 rack to give a quick & secure fixing. D3 number 3: 08 TDV6 SE Stormygrey /owlpacker
SIII Lightweight - neglected & rusting. Bulkhead now disintegrated - but its got a full service history!
|
| Sat Jun 06 2009 6:35pm |
|
|
90BHP
Member Since: 18 Oct 2006
Location: Half way along the road on the right
Posts: 3465
|
G4 Rack uses D2 Crossbar to make the front rail that DaveT speaks of. Fairly regular item on the well known auction site
End result very prof looking Expo rack that can take the longer loads like pyranha kayaks as featured on the G4 challenge  "To finish first, one first has to finish ...."
|
| Sat Jun 06 2009 6:43pm |
|
|
MrH
a.k.a. The Silver Baron
Member Since: 08 Aug 2007
Location: Lost as usual, but "on the wagon for a change"
Posts: 2609
 
|
Siply cold-chisel or drill out the 4 riverts holding the rear cross-bar in place, then ease the cross bar out and the Oz tent fits on the rack no problems - plus the cross bar can easily be refitted - just use some self-tappers to allow easy fitting/removal.
|
| Sat Jun 06 2009 8:18pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
