vnitos
Member Since: 17 Oct 2010
Location: ZA
Posts: 61
|
replace Disco3 SE headlights with Disco3 HSE headlights |
|
is it possible to replace the headlights on the Disco3 SE (xenons without cornering lights) with those as on the Disco3 HSE (with cornering lights). how difficult a job is it?
|
29th Jan 2011 1:19 pm |
|
|
|
vnitos
Member Since: 17 Oct 2010
Location: ZA
Posts: 61
|
GSLRO wrote:Why settle for D3 when you can go for the D4 look
http://www.disco3.co.uk/forum/topic48751.html
hi thanks for your reply - according to pete (bellsautos), it is a very expensive exercise to go for that look as, in addition to the lights itself, you also have to replace both the front wings to accommodate those lights. in addition, a friend of mine did a similar modification to his ffrr (2005 model) to bring it in line with the 2007/8 model. it cost him an arm and a leg.
i'd just like to get that extra functionality of the HSE as i could possibly get the HSE lights at a good price.
thanks
trevor
|
29th Jan 2011 8:08 pm |
|
|
dsd1036
Member Since: 27 Feb 2010
Location: Surrey
Posts: 2692
|
Hi,
Easy job, remove your existing and fit new!
If they are adaptive, these wont work without additional wiring loom, a different ecu and some programming with a faultmate.
However you can have cornering activated via a faultmate and this requires no additional wiring etc!
rgds
Darrell
|
29th Jan 2011 8:14 pm |
|
|
GSLRO
Member Since: 10 Sep 2008
Location: Sunderland
Posts: 1279
|
Vnitos, did Pete not give you any advice on the D3 lights upgrade, as DSD says it can be done but the major adaptive enhancement requires a bit more work!
Good Luck
George Club N.E.R.D.s
|
30th Jan 2011 10:24 am |
|
|