Member Since: 06 Jan 2007
Location: Holmfirth
Posts: 8
Enabling D4 tow electrics
Hi all - can anyone point me at someone who can enable the tow electrics on a D4 in the North West / Yorkshire area please? An idea of the going rate would be great too!
Thanks in advance.
Heath
8th Jan 2012 11:26 pm
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Pete @ BAS one of the site sponsors
Great bloke really helpfull MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
9th Jan 2012 9:41 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
what year is your D4 ?G4 Gone ...but not forgotten
9th Jan 2012 10:27 am
J4CKO
Member Since: 06 Jan 2007
Location: Holmfirth
Posts: 8
wiggs wrote:
what year is your D4 ?
Hi there - it's a 2012 - arrives next Thursday. There are a couple of comments on the forum that state the 2012 wiring kit is different that the 2011 but the part numbers are the same. I was looking at a wiring kit on e-bay but I'm wondering if it might be a dealer job
Cheers, H
9th Jan 2012 10:34 am
forbyfor
Member Since: 11 Sep 2008
Location: North East
Posts: 47
Jacko
I recently purchased a vehicle specific Wiring kit from e bay ( tow equipe) for my MY12
Mine didnt need enabling but I dont know if that is because the dealer had already pre enabled them ( if this is possible? )
ANDY 2012 XS
Ipenema Sand
Privacy Glass,bi xenons
Free premium nav4x4info and voice(thanks Land Rover)
09 SE gone but not forgotten
9th Jan 2012 10:46 am
keheha
Member Since: 11 May 2010
Location: UK
Posts: 28
Slightly OT: Is there a saving in not specifying the tow kit (£500 factory option) when buying a new D4 and adding it done afterwards? I saw brand new original tow electrics on fleabay at £100... What do people normally do?
/K
9th Jan 2012 1:56 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
j4cko....i think you may have to have the dealer enable the electrics ....
at the moment the faultmate does not support the 2012 model
forbyfor
do you get the trailer icon on the dash when you have the electrics plugged in and indicating?
and are you saying you dont get the reversing beeper (PDC ) when hitched up and in reverse ?G4 Gone ...but not forgotten
9th Jan 2012 2:03 pm
J4CKO
Member Since: 06 Jan 2007
Location: Holmfirth
Posts: 8
wiggs wrote:
j4cko....i think you may have to have the dealer enable the electrics ....
at the moment the faultmate does not support the 2012 model
Thanks Wiggs - thinking it might be a dealer job as well. So, why didn't I specify the factory tow pack on a 56 grand motor?? Honestly - I forgot!! Let the abuse commence...!
Thanks all for comments. Cheers, H
10th Jan 2012 11:41 pm
Seamanm
Member Since: 28 Dec 2011
Location: Yorkshire
Posts: 15
D4 towbar electrics
Hi J4cko.
I recently fitted my old D3 tow electrics to my 2010 D4 and the lights and indicators were coming on all wrong, it was like a trip to Blackpool everytime i turned a corner or braked I posted a note here in December and was advised that they are different looms. Anyway thinking that they both do the same thing i.e. take power from the car loom connector and direct it to the right pin on the tow socket i set about tracing what wires did what.
After about two hours with a multimeter and a couple of small screwdrivers i had it all sorted and working fine. Its a tidy job too with most of the pins in the towbar loom socket simply 'unhooked' and relocated in the socket to match the right power feed to the right bulb on the trailer. I have a twin socket trailer socket and i had to swap two wires over but other than that everythings working fine......i haven't even had to get the electrics 'enabled' by a dealer, they work fine. The only nuisance is that when reversing with a trailer the beepers come on but they can be knocked off with the switch on the dashboard. I will check with my dealer what needs to be enabled in case i'm missing something important.
If you're thinking of doing the same let me know and i'll post some pics and explanation. 2003 Freelander 1
2005 Disco 3
2010 Disco 4
11th Jan 2012 10:10 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Getting it enabled turns off the rear PDC when electrics are connected
It also let's you select what you want the 7th pin on the electrics to do .. Ie ...reverse lights / fog lights etc
It also stops the terrain response knob from raising the car while a trailer is attachedG4 Gone ...but not forgotten
11th Jan 2012 10:20 pm
Seamanm
Member Since: 28 Dec 2011
Location: Yorkshire
Posts: 15
Thanks Wiggs the reversing alarm is a bit of a pain but only once a month at the tip!! The fogs work all ok but i haven't tried the terrain response. Nevertheless i'll get it all checked and sorted next time i'm at the garage.2003 Freelander 1
2005 Disco 3
2010 Disco 4
11th Jan 2012 10:25 pm
Seamanm
Member Since: 28 Dec 2011
Location: Yorkshire
Posts: 15
Thanks Wiggs the reversing alarm is a bit of a pain but only once a month at the tip!! The fogs work all ok but i haven't tried the terrain response. Nevertheless i'll get it all checked and sorted next time i'm at the garage.2003 Freelander 1
2005 Disco 3
2010 Disco 4
11th Jan 2012 10:55 pm
J4CKO
Member Since: 06 Jan 2007
Location: Holmfirth
Posts: 8
Re: D4 towbar electrics
Seamanm wrote:
If you're thinking of doing the same let me know and i'll post some pics and explanation.
Thanks Seamanm - sounds like it might be at the tipping point where I put tools down and get checkbook out.
By the way, mate of mine works in Engineering in JLR (on the Evoke) and he assures me that they don't just change things to keep the dealers locked in - it will be for real engineering reasons - well, actually, they've found a cheaper way of doing it!!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I posted a note here in December and was advised that they are different looms. Anyway thinking that they both do the same thing i.e. take power from the car loom connector and direct it to the right pin on the tow socket i set about tracing what wires did what.
