Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Technical (D3)

EPB adjust
Post Reply  Down to end
Page 1 of 1
cmb2020
 


Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150

United Kingdom 2005 Discovery 3 TDV6 SE Manual Aintree GreenDiscovery 3
EPB adjust

Hi again (second post today)

I recently jammed my EPB and had to manually release them use my IID to unjam three times to make it work. It screeched like crazy until unnamed then seems tonhve been working fine for a month now

Although am aware I need to readjust the brake pads and service apparently

My question is:

Must I remove the wheels and readjust the barrels 8 clicks before bedding them in using the 10x stop routine? Or can I just do the stop start routine to adjust them please?

I tried lifting the back end to remove wheels but my jack bent and I gave up

So I’m hoping I can get away with bedding in only?

The whole system was replaced about 18 months ago new module and pads etc

Ideall want to not remove wheels etc

Tia Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales  
Post #234855922nd Sep 2023 11:16 am
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8104

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

You have got to remove the wheels to adjust, they are ready for a service anyway, LR recommend every 50 miles in hardous conditions Shocked otherwise every service, neglect them at your peril! It can when others can't,
It will when others won't,
It goes where others don't.  
Post #234856522nd Sep 2023 12:10 pm
View user's profile Send private message View poster's gallery Reply with quote
cmb2020
 


Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150

United Kingdom 2005 Discovery 3 TDV6 SE Manual Aintree GreenDiscovery 3

Thanks so does that mean remove wheels but not drums? Tighten the adjusters and undo the hex bolt for the shoe locker thing?

Can I do one wheel at a time or does the back end need to be lifted completely for an even tension

Tia Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales  
Post #234856722nd Sep 2023 12:16 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10365

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Get a bottle jack like this.

https://www.ebay.co.uk/itm/276060175406?mk...media=COPY

https://www.ebay.co.uk/itm/235090880378?mk...media=COPY

Red bottle jack and 2 rods to pump it up.

Only need to do one side at a time.

I wouldn’t use the bedding in process unless shoes are brand new.  
Post #234857922nd Sep 2023 1:40 pm
View user's profile Send private message View poster's gallery Reply with quote
cmb2020
 


Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150

United Kingdom 2005 Discovery 3 TDV6 SE Manual Aintree GreenDiscovery 3

Thanks so the main goal is to undo the wheels and adjust the barrels tight then 8 clicks loosen? Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales  
Post #234858122nd Sep 2023 1:56 pm
View user's profile Send private message View poster's gallery Reply with quote
Admirable
 


Member Since: 19 Jul 2015
Location: Fife
Posts: 1012

Ukraine 2007 Discovery 3 TDV6 XS Auto Zermatt SilverDiscovery 3

Pete K wrote:
Get a bottle jack like this.

https://www.ebay.co.uk/itm/276060175406?mk...media=COPY

https://www.ebay.co.uk/itm/235090880378?mk...media=COPY

Red bottle jack and 2 rods to pump it up.

Only need to do one side at a time.

I wouldn’t use the bedding in process unless shoes are brand new.


And axel stands!  
Post #234858222nd Sep 2023 2:05 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10365

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Search for bodsey brake bible on here.

Or

?si=GctgQNTbH8mr9V6a  
Post #234858322nd Sep 2023 2:05 pm
View user's profile Send private message View poster's gallery Reply with quote
cmb2020
 


Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150

United Kingdom 2005 Discovery 3 TDV6 SE Manual Aintree GreenDiscovery 3

I did watch all these I’m just trying to do as little as possible out of frustration my jack broke haha

I’ve got a bottle Jack I’ll try to do it with one wheel lifted using that truck to make it raise a wheel. Might be easier. Put the jack under the wishbone and it auto raises. Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales  
Post #234858422nd Sep 2023 2:07 pm
View user's profile Send private message View poster's gallery Reply with quote
Pete K
 


Member Since: 15 Jan 2016
Location: GL
Posts: 10365

England 2005 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

There should be 2 wheel chocks in the back of the car.
Put them at the front of the front tyres when the car is jacked up. Don’t forget to remove!

Halfords sell axel stands. Do need to be safe with these heavy D3  
Post #234858522nd Sep 2023 2:13 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site