Hi you very knowledgable people! I have just had mu EGR's blanked by a local independant. He said there was no need for any patch. My car is a 2007MY on a 56 plate.
First, is he correct - fear possibly not.
Secondly. I am having intermittent faults appearing where I get two lights on the dash with a 'bong' follows seconds after by a third light (suspension) and an 'F' in the gear selector window. The car lowers and transmission becomes sluggish. This clears completely if I restart the car.
Now, would this be a symptom of a patch being needed? I stress that this happens at completely random times!
Martin07MY TDV6 HSE Stornoway Grey + Alpaca
No ugly kid glass!
Side steps (one with dent!)
BIG GRIN (although turned down at the edges)
Extremely empty wallet
26th Oct 2016 5:27 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Martin,
If yours is Sallaaa7axxxxx then yes, you need the egr patch.
Some 07/08 cars do the same as yours is doing, down to the bump stops etc. This IS cured by the egr software update.Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
26th Oct 2016 5:50 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
Wonky wrote:
Hi you very knowledgable people! I have just had mu EGR's blanked by a local independant. He said there was no need for any patch. My car is a 2007MY on a 56 plate.
First, is he correct - fear possibly not.
Secondly. I am having intermittent faults appearing where I get two lights on the dash with a 'bong' follows seconds after by a third light (suspension) and an 'F' in the gear selector window. The car lowers and transmission becomes sluggish. This clears completely if I restart the car.
Now, would this be a symptom of a patch being needed? I stress that this happens at completely random times!
Martin
martin
give a pm i get your way quite a bit
26th Oct 2016 7:51 pm
Gekko308
Member Since: 01 Nov 2016
Location: 3420
Posts: 1
Bodsy can you send me an PM
1st Nov 2016 2:05 pm
Tocky83
Member Since: 08 Nov 2016
Location: NOrthampton
Posts: 4
EGR Valve Remap on my LR3 they wanted £150 so I go on ebay looking for software to disable egr for £15. Only downside is I don't know how to do it. step by step
8th Nov 2016 7:29 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
think u might of just wasted 15 quid bud
8th Nov 2016 7:31 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Tocky, good luck with that.......
If you want it doing properly let me know, I'll be in Northampton either Thursday or next week.Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
8th Nov 2016 8:02 pm
Tocky83
Member Since: 08 Nov 2016
Location: NOrthampton
Posts: 4
I just got a blanking plate for my EGR Valve LR3 2007. Do I need to disable the EGR valve?
What can I do with the light on dash? Can I turn it off with the ODB reader and Delete the code?
8th Nov 2016 8:07 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Yes, but you'll have to reset it every three engine starts.......
Or just get it mapped out properly....Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
8th Nov 2016 8:11 pm
Tocky83
Member Since: 08 Nov 2016
Location: NOrthampton
Posts: 4
Bodsy wrote:
Tocky, good luck with that.......
If you want it doing properly let me know, I'll be in Northampton either Thursday or next week.
That would be great. coz I got a blank plate coming on Thursday so Friday I can get my hand dirty.
How much you wanted?
9th Nov 2016 5:18 pm
Tocky83
Member Since: 08 Nov 2016
Location: NOrthampton
Posts: 4
No need to Blank EGR Valve just clean it, NO need to repalce
My car had the Engine light come on wit EGR fault code.
First I was going to Blank it off and get it remap. Than I though Why??
A lot of people buying a new valve or blank it off.
all I did is remove the 2x 8mm from the EGR valve and get EGR cleaner that cost £6.99 for 300ml
get long plastic tube connect to the EGR Cleaner cans and spray it inside the valve. a long small screw driver to push the piston in and out and keep spray it in until u happy.
my car lost a power because of the egr valve piston is stack.
I would do the same with the turbo if I had time.
no need to take egr our or spray it in to the air in-take 100% work direct in to the valve
21st Nov 2016 5:12 pm
TC179
Member Since: 19 Aug 2014
Location: uk
Posts: 145
Bodsy wrote:
Tocky, good luck with that.......
If you want it doing properly let me know, I'll be in Northampton either Thursday or next week.
Hi Bodsy, I didn't know you covered this area.. Next time you're in Northampton could you do me a remap and EGR blank? 2005 tdv6 so simples. I've got the blanking kit but not had a minute spare and too chicken to do the remap on my own.. visions of 3 ton bricks!
21st Nov 2016 5:23 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
No problem. looking like i'll be there Thursday.
I spent the first 28 years of my life in Northampton, so good excuse to see the Family. I'll be back again Friday eve to watch the Saints vs Newcastle with the boy as well.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
