skillie
Member Since: 06 Apr 2010
Location: Cork
Posts: 8
|
| Transfer Box & Terrain Response Not Working |
|
hi i checked the faults and fixes section and didn't see this problem so hope i'm posting in the correct place.
my Discovery seems to have issues with the transfer box and terrain response. I can't change into "lo" or select any of the terrain response options. when i try i get a warning sound and "system fault, special programs not available" warning notification.
anyone had similar? software prob? dealer i'm guessing?
thanks
eddie
|
 6th Apr 2010 10:14 pm |
|
|
Olls
Member Since: 09 Mar 2010
Location: Northamptonshire
Posts: 15
  
|
Hi, I have exactly the same on my 06 D3 Auto, it's going into Dealer on Thursday so will let you know how I get on. Would be interested to hear of anyone else who has or has had similar and what the outcome was?
|
| 6th Apr 2010 11:20 pm |
|
|
Q86ARR
Member Since: 23 Feb 2010
Location: Jersey
Posts: 378
  
|
Check for signs of leaked battery acid onto the transfer box ECU behind the battery.
Caused by a blocked battery breather tube
|
| 7th Apr 2010 8:52 pm |
|
|
Olls
Member Since: 09 Mar 2010
Location: Northamptonshire
Posts: 15
|
Hi, just been told by LR Newport Pagnell that problem is water in transfer case control module, causing corosion and needs replacing. Apparently the scuttle panel (the trim fitting to windscreen) was not fitted properly and was leaking water, just needed adjusting to fit flush.
Juddering when accelerating is EGR Valves.
hope this helps 
|
| 8th Apr 2010 3:44 pm |
|
|
skillie
Member Since: 06 Apr 2010
Location: Cork
Posts: 8
|
did your ECU need to be replaced or just cleaned up to remove corrosion?
is the ecu easy to get at or will i need the battery out?
thanks
|
| 11th Apr 2010 12:41 pm |
|
|
