watteau
Member Since: 20 Dec 2005
Location: Dubai, UAE
Posts: 40
|
Can someone please tell me the pattern and offset for wheels for the LR3? Also is it identical for the RRS?
thanks in advance
Alex
|
5th Feb 2006 6:12 am |
|
|
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10289
|
It should be 5 x 120mm bolt pattern. Not sure about the offset though. It is the same as the L322 RR and RRS. If you're thinking about changing wheels, check wieght ratings as Disco 3 is heavier than most other LR models.
Al Volvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
|
5th Feb 2006 11:09 am |
|
|
phips
Member Since: 29 Dec 2005
Location: Switzerland
Posts: 17
|
al cope wrote:It should be 5 x 120mm bolt pattern. Not sure about the offset though. It is the same as the L322 RR and RRS. If you're thinking about changing wheels, check wieght ratings as Disco 3 is heavier than most other LR models.
Al
I was wondering if bolt patterns/offset are identical with Disco I? I have new 18" alu alloy wheels on my Disco I and would like to put them on my ordered D3 if it is possible.
|
10th Feb 2006 8:57 am |
|
|
Non Stick Nick
Member Since: 02 Oct 2005
Location: Reading, Berkshire
Posts: 772
|
wheels from series 1 disco's will not fit series 2 or 3
wheels from series 2 disco's will not fit series 1 or 3
wheels from series 3 disco's will not fit series 2 or 1
wheels from D2 have the same pcd as P38 RR
wheels from D3 have the same pcd as RRS
the pcd for RRS&D3 is the same as D2 but the wheels will not fit due to the hole in the centre of the wheel being diffrent.
Apart from early RR the rims from 90 110 RRclassic Disco1 all have the same pcd. You would need to check loadings for the 110 though as it can run @ 3.5t gvw & I know that steel RR rims are not up to the job, where they are fine on a 90.
Nick I am a hob nobber.
|
10th Feb 2006 9:42 am |
|
|