Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > General

wheel studs
Post Reply  Down to end
Page 1 of 1
buckyblue
 


Member Since: 10 Sep 2011
Location: eire
Posts: 59

2007 Discovery 3 TDV6 Commercial Manual Buckingham BlueDiscovery 3
wheel studs

help had to drill one of the wheel nuts off i now need to buy stud and wheel nut stealers here say i have to buy complete hub it is the front wheel anybody no where i can get stud and nut or a few of them. thanks also the stud how do you go about removing from hub is it threaded or can i use a punch from nut side and bang it out Banging Head
  
Post #123920419th Feb 2014 11:55 am
View user's profile Send private message View poster's gallery Reply with quote
Disco_Mikey
 


Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20713

Scotland 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

Wheel studs not available separate. Need to find someone who has changed a wheel bearing, and ask them nicely for it Thumbs Up

If it is the front hub, they swap over no bother, hammer out, and draw the new one in with the wheel nut.
If it is the rear, you have to split and replace the bearing, as you cannot get the stud past the hub carrier
 My D3 Build Thread

TDV8 Retrofit Build Thread 
 
Post #123920519th Feb 2014 11:58 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
DiscoDunc
 


Member Since: 08 May 2006
Location: Bristol
Posts: 16390

England 2010 Discovery 4 3.0 SDV6 HSE Auto Aintree GreenDiscovery 4

I looked into this a few years ago and found a place that supplied them . not Genuine Lr ones but the same size and fitting etc. in the end I changed the bearing and kept the old one as spare, but it all got sold off a while back. I'll see if I can find the company details
 Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide 
 
Post #123921319th Feb 2014 12:19 pm
View user's profile Send private message View poster's gallery Reply with quote
buckyblue
 


Member Since: 10 Sep 2011
Location: eire
Posts: 59

2007 Discovery 3 TDV6 Commercial Manual Buckingham BlueDiscovery 3
wheel studs

thanks discodunc
  
Post #123922219th Feb 2014 12:39 pm
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

I'm sure I've got three studs if you need one. Pm me your address if you like Thumbs Up
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #123930519th Feb 2014 3:45 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
pug pug
 


Member Since: 14 Dec 2008
Location: leeds
Posts: 167

England 2006 Discovery 3 TDV6 HSE Auto Tonga GreenDiscovery 3
studs

hi i have 5 studs if you need them. i changed front wheel hub.put new bearing in/you,s if you want the. Thumbs Up
  
Post #123998020th Feb 2014 6:29 pm
View user's profile Send private message View poster's gallery Reply with quote
DiscoDunc
 


Member Since: 08 May 2006
Location: Bristol
Posts: 16390

England 2010 Discovery 4 3.0 SDV6 HSE Auto Aintree GreenDiscovery 4

sorry, I cant find the site. I know it took me ages the first time Sad
 Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide 
 
Post #124006620th Feb 2014 8:22 pm
View user's profile Send private message View poster's gallery Reply with quote
John the oak
 


Member Since: 11 Sep 2021
Location: Mid-Wales
Posts: 3

United Kingdom 2005 Discovery 3 TDV6 Base 7 Seat Auto Unknown ColourDiscovery 3
Changing rear wheel studs

I have just changed one on my D3 and didn’t fancy having to take the hub off and press out the bearings etc. but found an easier way. The studs on the rear wont press out of the hub as they hit the bearing housing but if you hammer them in a couple of mm you get get a blade in and cut off the head of the old stud then knock it through. I then cut the corned off the head of the new stud (same as Disco 2 or P38 #FTC2057) and chamfered the very end of the thread, it can then be inserted from the back of the flange. I don’t suppose a dealer would do it this way but there is so little material removed I cannot see it failing. Obviously you do have to take off one of the parking brake shoes to get access but beats taking the hub apart, hope this helps someone. Photos attached.




Click image to enlarge


  
Post #22547902nd Oct 2021 11:35 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site