| Last additions |
329 views15 Jul 2010
|
|
312 views15 Jul 2010
|
|
314 views15 Jul 2010
|
|
Rear Plate93 views15 Jul 2010
|
|
Front Plate96 views15 Jul 2010
|
|
44 views15 Jul 2010
|
|
nullaosta gancio traino154 views15 Jul 2010
|
|
111 views14 Jul 2010
|
|
75 views14 Jul 2010
|
|
97 views14 Jul 2010
|
|
109 views14 Jul 2010
|
|
92 views14 Jul 2010
|
|
89 views14 Jul 2010
|
|
82 views14 Jul 2010
|
|
89 views14 Jul 2010
|
|
81 views100" wheelbase,dana axles,big v8 :)14 Jul 2010
|
|
64 viewschevy v8,straight through pipes :)14 Jul 2010
|
|
63 viewsMy new projec14 Jul 2010
|
|
37 views14 Jul 2010
|
|
243 views14 Jul 2010
|
|
229 views14 Jul 2010
|
|
212 views14 Jul 2010
|
|
291 views14 Jul 2010
|
|
222 views14 Jul 2010
|
|
87 views14 Jul 2010
|
|
remouvable tow bar italian certification number122 views14 Jul 2010
|
|
headlight D3142 views14 Jul 2010
|
|
GVIF v6.169 views14 Jul 2010
|
|
Sump Plate37 views14 Jul 2010
|
|
Drivers Mat29 views14 Jul 2010
|
|
Mats24 views14 Jul 2010
|
|
103 views13 Jul 2010
|
|
123 views13 Jul 2010
|
|
7696 views13 Jul 2010
|
|
97 views13 Jul 2010
|
|
Removal of C-Pillar Lower Trim84 views13 Jul 2010
|
|
79 views13 Jul 2010
|
|
64 views13 Jul 2010
|
|
132 views13 Jul 2010
|
|
Jan 201064 views12 Jul 2010
|
|
343 views12 Jul 2010
|
|
LRE Malverns 349 viewsLRE Malverns 200512 Jul 2010
|
|
LRE Malverns 249 viewsLRE Malverns 200512 Jul 2010
|
|
LRE Malverns 150 viewsLRE Malverns 200512 Jul 2010
|
|
Disco4 & Cooper90 viewsdiscoDB\'s D4 HSE
Mrs discoDB\'s Mini Cooper Mayfair12 Jul 2010
|
|
79 views12 Jul 2010
|
|
64 views12 Jul 2010
|
|
57 views12 Jul 2010
|
|
56 views12 Jul 2010
|
|
46 views12 Jul 2010
|
|
48 views12 Jul 2010
|
|
229 views12 Jul 2010
|
|
114 views12 Jul 2010
|
|
110 Td5105 viewsThe old Td5 with Alive re map. Great car, much missed12 Jul 2010
|
|
D3105 views12 Jul 2010
|
|
D3 dogs141 views12 Jul 2010
|
|
D380 views12 Jul 2010
|
|
D382 views12 Jul 2010
|
|
Sheigra in North West Scotland with the Td5100 views12 Jul 2010
|
|
58 views12 Jul 2010
|
|
55 views12 Jul 2010
|
|
![IMG_0023 [1600x1200].JPG](albums/userpics/10454/thumb_IMG_0023%20%5B1600x1200%5D.JPG "Filename=IMG_0023 [1600x1200].JPG
Filesize=173KB
Dimensions=1280x960
Date added=12.Jul 2010")
They work then116 views12 Jul 2010
|
|
![IMG_0024 [1600x1200].JPG](albums/userpics/10454/thumb_IMG_0024%20%5B1600x1200%5D.JPG "Filename=IMG_0024 [1600x1200].JPG
Filesize=175KB
Dimensions=1280x960
Date added=12.Jul 2010")
Oooh104 views12 Jul 2010
|
|
![IMG_0021 [1600x1200].JPG](albums/userpics/10454/thumb_IMG_0021%20%5B1600x1200%5D.JPG "Filename=IMG_0021 [1600x1200].JPG
Filesize=186KB
Dimensions=1280x960
Date added=12.Jul 2010")
Ouch again116 views12 Jul 2010
|
|
![IMG_0022 [1600x1200].JPG](albums/userpics/10454/thumb_IMG_0022%20%5B1600x1200%5D.JPG "Filename=IMG_0022 [1600x1200].JPG
Filesize=182KB
Dimensions=1280x960
Date added=12.Jul 2010")
Ouch94 views12 Jul 2010
|
|
106 views12 Jul 2010
|
|
90 views12 Jul 2010
|
|
82 views12 Jul 2010
|
|
DDin Xtron kit first fit - slight adjustments needed top and bottom.101 views12 Jul 2010
|
|
77 views12 Jul 2010
|
|
59 views11 Jul 2010
|
|
57 views11 Jul 2010
|
|
54 views11 Jul 2010
|
|
53 views11 Jul 2010
|
|
53 views11 Jul 2010
|
|
48 views11 Jul 2010
|
|
51 views11 Jul 2010
|
|
62 views11 Jul 2010
|
|
49 views11 Jul 2010
|
|
60 views11 Jul 2010
|
|
49 views11 Jul 2010
|
|
56 views11 Jul 2010
|
|
49 views11 Jul 2010
|
|
49 views11 Jul 2010
|
|
55 views11 Jul 2010
|
|
52 views11 Jul 2010
|
|
89 views11 Jul 2010
|
|
96 views11 Jul 2010
|
|
100 views11 Jul 2010
|
|
89 views11 Jul 2010
|
|
86 views11 Jul 2010
|
|
90 views11 Jul 2010
|
|
96 views11 Jul 2010
|
|
84 views11 Jul 2010
|
|
97 views11 Jul 2010
|
|
76 views11 Jul 2010
|
|
168 views11 Jul 2010
|
|
77 views11 Jul 2010
|
|
93 views11 Jul 2010
|
|
187 views11 Jul 2010
|
|
148 views11 Jul 2010
|
|
121 views11 Jul 2010
|
|
108 views11 Jul 2010
|
|
69 views11 Jul 2010
|
|
201 views11 Jul 2010
|
|
GT3 RS decorato con parti nere opache53 views10 Jul 2010
|
|
116 viewsparticolare dei fari anteriori coperti con pellicola nera opaca10 Jul 2010
|
|
114 views10 Jul 2010
|
|
Nissan GT R matte black84 views10 Jul 2010
|
|
Nissan GT R matte black77 views10 Jul 2010
|
|
original MOST cable119 viewsreplace the short cable from Radio to Nav display with part of the additional MOST loom (YMQ502470)09 Jul 2010
|
|
additional most cable added to radio & nav display 109 views09 Jul 2010
|
|
end of the additional MOST cable76 views09 Jul 2010
|
|
connectivity module57 viewsthis part is used for the aftermarket kit and will be removed09 Jul 2010
|
|
47 views09 Jul 2010
|
|
aftermarket and factory BT module52 viewsnotice the additional MOST connector (with white protective cap) for the factory install module09 Jul 2010
|
|
Location of old BT module48 viewsyou can pull out the module carefully09 Jul 2010
|
|
95 views09 Jul 2010
|
|
46 views09 Jul 2010
|
|
56 views09 Jul 2010
|
|
51 views09 Jul 2010
|
|
47 views09 Jul 2010
|
|
179 views09 Jul 2010
|
|
189 views09 Jul 2010
|
|
OLD version Bodsy's Brake Bible V1.3 +text change2196 viewsMinor Text Change updated P7 and P9.08 Jul 2010
|
|
An ex-XC9091 views08 Jul 2010
|
|
attivate!!!63 views08 Jul 2010
|
|
Collegamento negativo56 views08 Jul 2010
|
|
IstruzioniFari71 views08 Jul 2010
|
|
71 views08 Jul 2010
|
|
World Cup Beers56 views07 Jul 2010
|
|
battery neg connection146 views07 Jul 2010
|
|
31 views07 Jul 2010
|
|
OLD VERSION Please check folder for newer. Bodsy's Brake Bible V1.32402 views07 Jul 2010
|
|
63 views06 Jul 2010
|
|
Pnc 1044 views06 Jul 2010
|
|
80 views06 Jul 2010
|
|
49 views06 Jul 2010
|
|
292 views06 Jul 2010
|
|
303 views06 Jul 2010
|
|
347 views06 Jul 2010
|
|
334 views06 Jul 2010
|
|
77 views06 Jul 2010
|
|
67 views06 Jul 2010
|
|
54 views06 Jul 2010
|
|
aAARRGGGHHHH!!!!135 views05 Jul 2010
|
|
97 views05 Jul 2010
|
|
93 views05 Jul 2010
|
|
83 views05 Jul 2010
|
|
76 views05 Jul 2010
|
|
85 views05 Jul 2010
|
|
91 views05 Jul 2010
|
|
91 views05 Jul 2010
|
|
Before and after227 views05 Jul 2010
|
|
New bonnet decall183 views05 Jul 2010
|
|
ATR\'s190 views05 Jul 2010
|
|
ATR\'s147 views05 Jul 2010
|
|
Nudge bar - bracket altered to fit with Mantec plate81 views05 Jul 2010
|
|
Nudge Bar Fitted - Black Grille98 views05 Jul 2010
|
|
Nudge Bar & Lamps fitted92 views05 Jul 2010
|
|
71 views04 Jul 2010
|
|
42 views04 Jul 2010
|
|
37 views04 Jul 2010
|
|
36 views04 Jul 2010
|
|
111 views04 Jul 2010
|
|
IC1094 views04 Jul 2010
|
|
IC11101 views04 Jul 2010
|
|
IC792 views04 Jul 2010
|
|
IC889 views04 Jul 2010
|
|
IC989 views04 Jul 2010
|
|
IC4105 views04 Jul 2010
|
|
IC591 views04 Jul 2010
|
|
IC694 views04 Jul 2010
|
|
IC198 views04 Jul 2010
|
|
IC285 views04 Jul 2010
|
|
IC385 views04 Jul 2010
|
|
106 views04 Jul 2010
|
|
auto gearbox leak94 views04 Jul 2010
|
|
56 views03 Jul 2010
|
|
79 views03 Jul 2010
|
|
79 views03 Jul 2010
|
|
75 views03 Jul 2010
|
|
147 views03 Jul 2010
|
|
69 views03 Jul 2010
|
|
82 views03 Jul 2010
|
|
75 views03 Jul 2010
|
|
79 views03 Jul 2010
|
|
79 views03 Jul 2010
|
|
94 views03 Jul 2010
|
|
47 views03 Jul 2010
|
|
60 views03 Jul 2010
|
|
oil seems to be coming from grommet on auto-box80 views03 Jul 2010
|
|
Oil leak on autobox/engine85 views03 Jul 2010
|
|
fully loaded91 views02 Jul 2010
|
|
42 views02 Jul 2010
|
|
88 views02 Jul 2010
|
|
Bulbs table57 views02 Jul 2010
|
|
Just like that45 views02 Jul 2010
|
|
95 views02 Jul 2010
|
|
76 views02 Jul 2010
|
|
Gear box casing showing wear from screaming friction...407 views...once the circlip has bust through the inadequate retaining land, the spring presses on the (other) gearbox casing, forcing the secondary gear to wear on the gear box casing where shown, there being no adequate provision for end-thrust (even though helical gearing would mandate that, to cope with the NORMAL axial vector forces produced) resulting from spring pressure on the other gearbox casing face pushing the gear into this face.02 Jul 2010
|
|
The faulty unit (secondary gear / torque clutch)371 viewsShowing the inadequate circlip retaining land, ripped iopen by the normal spring tension. Should never have been made of plastic...02 Jul 2010
|
|
75 views01 Jul 2010
|
|
73 views01 Jul 2010
|
|
72 views01 Jul 2010
|
|
74 views01 Jul 2010
|
|
135 views01 Jul 2010
|
|
79 views01 Jul 2010
|
|
119 views01 Jul 2010
|
|
99 views01 Jul 2010
|
|
96 views01 Jul 2010
|
|
84 views01 Jul 2010
|
|
72 views01 Jul 2010
|
|
82 views01 Jul 2010
|
|
103 views01 Jul 2010
|
|
97 views01 Jul 2010
|
|
Pathfinder at Tong103 views01 Jul 2010
|
|
Pathfinder at Tong93 views01 Jul 2010
|
|
75 viewsRoad Train in NQ01 Jul 2010
|
|
92 views30 Jun 2010
|
|
94 views30 Jun 2010
|
|
108 views30 Jun 2010
|
|
103 views30 Jun 2010
|
|
101 views30 Jun 2010
|
|
91 views30 Jun 2010
|
|
93 views30 Jun 2010
|
|
80 views30 Jun 2010
|
|
52 views30 Jun 2010
|
|
Reservoir Air In fitting installed 1648 viewsSchrader valve installed. Shop air can now be introduced into the tank to facilitate the raising of the 3 when there has just been a failure of the onboard air compressor rather than the electronics or valve block wiring etc.
Air could also be sourced from this point, however the purpose of the modification is air in, not air out as the air pressure normally runs above 200 psig, too high to be safe for routine use unless a pressure reducing regulator is added per the Mitchell Bros kit.30 Jun 2010
|
|
Reservoir Air In fittings exploded view 1885 viewsThis shows the fittings required for the mod. The reducer adaptor requires a 27mm socket and is M20 x 1.5 male thread x 1/4" NPT female. The 1/4" male NPT Schrader valve has the standard valve core removed and an AN/MIL spec aircraft oleo strut valve installed instead.
A standard automobile valve is rated at 200 psig, (14 bar); the air tank runs closer to 244 psig, (16.8 bar), with the relief valve set to open between 334 psig, (23 bar) and 370 psig (25.5 bar). The aircraft valve is rated at 2,000 psig, (138 bar).
30 Jun 2010
|
|
Reservoir Bung 24mm socket 1149 viewsThis is the view of the air tank at the end nearest the front left wheel. This is what you see before you do the mod. The other view is after the mod.
On pre 2008 models, there is this 24mm socket hex head bung, M20 x 1.5 thread, that can be unscrewed and the Schrader valve assembly installed instead. On newer 3's the bung hole was deleted from the front end of the air tank; hence the mod as described, is then not possible.30 Jun 2010
|
|
162 views29 Jun 2010
|
|
137 views29 Jun 2010
|
|
60 views29 Jun 2010
|
|
52 views29 Jun 2010
|
|
55 views29 Jun 2010
|
|
46 views29 Jun 2010
|
|
52 views29 Jun 2010
|
|
51 views29 Jun 2010
|
|
53 views29 Jun 2010
|
|
49 views29 Jun 2010
|
|
47 views29 Jun 2010
|
|
Dent47 views29 Jun 2010
|
|
49 views29 Jun 2010
|
|
43 views29 Jun 2010
|
|
41 views29 Jun 2010
|
|
Off Road height with adjustable rods171 views29 Jun 2010
|
|
Front adjustable rods188 views29 Jun 2010
|
|
Off Road height with adjustable rods190 views29 Jun 2010
|
|
65 views28 Jun 2010
|
|
48 views28 Jun 2010
|
|
44 views28 Jun 2010
|
|
57 views28 Jun 2010
|
|
45 views28 Jun 2010
|
|
44 views28 Jun 2010
|
|
44 views28 Jun 2010
|
|
59 views28 Jun 2010
|
|
47 views28 Jun 2010
|
|
Knackered Bush45 views28 Jun 2010
|
|
shredded tyres31 views28 Jun 2010
|
|
transfer case control module71 viewsPicture shows blown components of the Transfer Case control module after water ingress over time - with a healthy top up from over-enthusiastic lad with a high pressure water hose in the car wash!!!28 Jun 2010
|
|
41 views28 Jun 2010
|
|
44 views28 Jun 2010
|
|
Waoops!52 views28 Jun 2010
|
|
51 views28 Jun 2010
|
|
40 views28 Jun 2010
|
|
Breath in!!42 views28 Jun 2010
|
|
Tight Squeez48 views28 Jun 2010
|
|
42 views28 Jun 2010
|
|
43 views28 Jun 2010
|
|
Disco139 views28 Jun 2010
|
|
whoops77 viewsLatest score form the wife is
Skip 1 - 0 Seat Altea
28 Jun 2010
|
|
47 views28 Jun 2010
|
|
138 views27 Jun 2010
|
|
137 views27 Jun 2010
|
|
91 views27 Jun 2010
|
|
84 views27 Jun 2010
|
|
D3\'s and Vulcan138 views27 Jun 2010
|
|
75 views27 Jun 2010
|
|
99 views27 Jun 2010
|
|
91 views27 Jun 2010
|
|
100 views27 Jun 2010
|
|
112 views27 Jun 2010
|
|
83 views27 Jun 2010
|
|
EPB Failure Analysis467 viewsDocumented dissection of failed screaming EPB showing fundamental design flaw and use of inappropriate materials.27 Jun 2010
|
|
Side Lights101 views26 Jun 2010
|
|
50 views26 Jun 2010
|
|
47 views26 Jun 2010
|
|
CAD render of a rim I created.71 viewsCAD render of a rim I created. Was supposed to look like the 18" style 2 rims.26 Jun 2010
|
|
CAD render of a rim I created63 viewsCAD render of a rim I created. Was supposed to look like the 18" style 2 rims.26 Jun 2010
|
|
149 views26 Jun 2010
|
|
156 views26 Jun 2010
|
|
113 views26 Jun 2010
|
|
Newest LR recruits NIECES from my little bro125 views26 Jun 2010
|
|
Inside Front 241 views26 Jun 2010
|
|
Inside Front45 views26 Jun 2010
|
|
Layout39 views26 Jun 2010
|
|
46 views25 Jun 2010
|
|
46 views25 Jun 2010
|
|
Before and after143 views25 Jun 2010
|
|
Original D4 Wheel112 views25 Jun 2010
|
|
FFRR 7 Spoke98 views25 Jun 2010
|
|
48 views25 Jun 2010
|
|
44 views25 Jun 2010
|
|
44 views25 Jun 2010
|
|
45 views25 Jun 2010
|
|
1932 Model B Ford41 views25 Jun 2010
|
|
44 views25 Jun 2010
|
|
Rosen Player38 views25 Jun 2010
|
|
Equippment attateched to player, nothing more30 views25 Jun 2010
|
|
Rosen Player31 views25 Jun 2010
|
|
49 views25 Jun 2010
|
|
38 views25 Jun 2010
|
|
FFRR SC Grill into D3 Frame179 views25 Jun 2010
|
|
46 views25 Jun 2010
|
|
42 views25 Jun 2010
|
|
42 views25 Jun 2010
|
|
41 views25 Jun 2010
|
|
41 views25 Jun 2010
|
|
38 views25 Jun 2010
|
|
37 views25 Jun 2010
|
|
Island Bed39 views25 Jun 2010
|
|
End Bedroom Island Bed and Wardrobes37 views25 Jun 2010
|
|
End Bedroom With Island Bed34 views25 Jun 2010
|
|
Cooker sink and Hob - Cooker unused39 views25 Jun 2010
|
|
Electric and Gas Heating33 views25 Jun 2010
|
|
Heating, Power and Water controls32 views25 Jun 2010
|
|
Fridge Freezer36 views25 Jun 2010
|
|
33 views25 Jun 2010
|
|
33 views25 Jun 2010
|
|
Inside Bedroom33 views25 Jun 2010
|
|
inside Microwave - UNUSED32 views25 Jun 2010
|
|
Inside Cooker - UNUSED32 views25 Jun 2010
|
|
Inside cooker - UNUSED31 views25 Jun 2010
|
|
38 views25 Jun 2010
|
|
33 views25 Jun 2010
|
|
31 views25 Jun 2010
|
|
19 views25 Jun 2010
|
|
20 views25 Jun 2010
|
|
19 views25 Jun 2010
|
|
17 views25 Jun 2010
|
|
19 views25 Jun 2010
|
|
18 views25 Jun 2010
|
|
19 views25 Jun 2010
|
|
18 views25 Jun 2010
|
|
14 views25 Jun 2010
|
|
radio wiring diagrams83 views24 Jun 2010
|
|
66 views24 Jun 2010
|
|
66 views24 Jun 2010
|
|
73 views24 Jun 2010
|
|
63 views24 Jun 2010
|
|
71 views24 Jun 2010
|
|
77 views24 Jun 2010
|
|
73 views24 Jun 2010
|
|
67 views24 Jun 2010
|
|
69 views24 Jun 2010
|
|
68 views24 Jun 2010
|
|
85 views24 Jun 2010
|
|
70 views24 Jun 2010
|
|
66 views24 Jun 2010
|
|
28 views23 Jun 2010
|
|
32 views23 Jun 2010
|
|
23 views23 Jun 2010
|
|
18 views23 Jun 2010
|
|
24 views23 Jun 2010
|
|
17 views23 Jun 2010
|
|
17 views23 Jun 2010
|
|
18 views23 Jun 2010
|
|
25 views23 Jun 2010
|
|
HID Dip47 views23 Jun 2010
|
|
HID Dip51 views23 Jun 2010
|
|
HID Dip, Halogen main47 views23 Jun 2010
|
|
116 viewsMatte Black wrap + Carbon fiber doors23 Jun 2010
|
|
106 viewsMatte Black wrap + Carbon fiber doors23 Jun 2010
|
|
95 viewsMatte Black wrap + Carbon fiber doors23 Jun 2010
|
|
91 viewsMatte Black wrap + Carbon fiber doors23 Jun 2010
|
|
111 views23 Jun 2010
|
|
88 views23 Jun 2010
|
|
86 views23 Jun 2010
|
|
84 views23 Jun 2010
|
|
Watch Topic105 views23 Jun 2010
|
|
numpty66 views23 Jun 2010
|
|
OLD VERSION Please check folder for newer. Bodsy's Brake Bible V1.2a6861 views22 Jun 2010
|
|
171 views22 Jun 2010
|
|
135 views22 Jun 2010
|
|
163 views22 Jun 2010
|
|
136 views22 Jun 2010
|
|
cake90 views22 Jun 2010
|
|
106 views22 Jun 2010
|
|
42 views22 Jun 2010
|
|
41 views22 Jun 2010
|
|
139 views22 Jun 2010
|
|
Dust Seal duct taped back together 2260 viewsThis shows the dust seal duct taped back together; also the surplus wire rope exiting from the actuator area prior to being cut to length.
I do not think the sticky plastic membrane is a dust seal, but more of a cable protector to cover up the wiring bundle that is effectively sticking to the underside of the flexible membrane.22 Jun 2010
|
|
Flexible wire rope fishing leader 0.032" diameter exiting carpet 1934 viewsThis is all you see of the completed mod.
The short little angled "line" about an inch long that looks like a piece of debris and is located a few inches "above" the support cable is actually the wire rope release cable exiting from under the carpeted lift gate cover.
I drilled a very small hole in the carpet and pushed the 0.032" diameter release wire thru and then slipped the loose end under the black plastic.
To release with the lift gate etc closed, from the inside, just pull the loose end free from under the black plastic and gently pull wire about 5mm, (1/4"), and the upper door catch should release. You will have to manually push the upper door out wards to actually effect opening, but you will already be inside the rear cargo area so that part is easy to do.
The assumption is that the lower door latch still works electrically and hence, the lower lift gate half will open as normal by pressing the usual button on the top left of the lower door half. 22 Jun 2010
|
|
Carpeted cover removed showing uncut dust seal and underside of carpeted cover. 1618 viewsNote that there are all sorts of electrical wires sticking to the underside of the dust shield - so be very careful when you cut thru the shield.
I used a box knife very slowly and was surprised at how many conductors there were running just under the shield membrane.22 Jun 2010
|
|
Carpet Panel Removed showing Bass Speaker and Dust Shield 1723 viewsSomething is wrong with the orientation, however this shows what you see when the carpet is removed.
The dust shield, (under which the actuator is located), in the picture is as yet uncut. The white bit is the underside of the plastic lower lift gate carpeted cover panel.
The round thing is the woofer speaker for the Harmon Kardon radio. When the radio is working, one can see the speaker moving, but not much bass sound actually seems to emanate from the speaker.22 Jun 2010
|
|
0.032" OD metal fishing leader and lead fishing weight clamped to existing wire rope 2105 viewsI used a size #0 lead fishing weight as a clamp to attach the 0.032" diameter flexible wire rope fishing leader to the release cable.
The pictured weight is the smaller #00 weight, however it did not work very well so reinstalled with the larger #0 size. I clamped to the cable as what breaks is the L retainer that is hidden in the actuator and holds the cable. When the L breaks, it lets go of the cable so you hear the clicking but there is no opening action.
Clamping on to the cable is an attempt to resolve that reality; also if the actuator electrically fails, the release mod should still do the task. Note in the picture the two Torx T15 screws that hold the gold plate to the plastic case and also the two 8mm cap screws that have to be loosened to remove the actuator from inside the door.22 Jun 2010
|
|
Dust seal rolled back showing electrical conductors 1647 viewsNote power conductors just under the dust seal which makes cutting the seal more interesting.
Also shown are the two 8mm nuts located in slots. One must loosen each nut to effect removal of the actuator. This will then reveal two T15 Torx screws that one must completely un-thread to remove the top gold plate from the actuator assembly.22 Jun 2010
|
|
Dust seal cut; note electrical conductors right under dust seal 1616 viewsShows what is underneath when the dust seal is cut. Note the electrical conductors.
I used a box knife to cut the plastic and it was at first easy; then I seemed to hit something and fortunately I stopped - it was the wires - lots of them stuck right to underside of the sticky seal material.
Also shown are the two 8mm nuts in slots that you only have to loosen to release the gold actuator assembly.22 Jun 2010
|
|
131 views21 Jun 2010
|
|
| 233639 files on 585 page(s) |
 |
|
|
|
|
|
|
504 | |
|
|
|
|
|
