Difference between revisions of "Charging through towing socket"

From DISCO3.CO.UK Knowledge Base
Jump to: navigation, search
(Introduction)
m
Line 3: Line 3:
 
Rather than lifting the bonnet and removing the battery cover, vehicles can be charged using the tow electric socket, if you have either twin 12N/S electrics (with two 7 pin sockets) or the 13 pin socket.
 
Rather than lifting the bonnet and removing the battery cover, vehicles can be charged using the tow electric socket, if you have either twin 12N/S electrics (with two 7 pin sockets) or the 13 pin socket.
  
The wiring between the 12V positive pin below and the battery feed is fused on the vehicle but it is recommended to add an additional fuse in your electrics wiring for maximum safety. Choose a fuse with a rating a little over the maximum output of your charger but below the 15 amp rating of the tow electrics fuse (mounted in the left hand boot cubby).
+
The wiring between the 12V positive pin below and the battery is fused on the vehicle but it is recommended to add an additional fuse in your electrics wiring for maximum safety. Choose a fuse with a rating a little over the maximum output of your charger but below the 15A rating of the tow electrics fuse.
  
 
==Ready Made==
 
==Ready Made==

Revision as of 11:38, 21 January 2013

Introduction

Rather than lifting the bonnet and removing the battery cover, vehicles can be charged using the tow electric socket, if you have either twin 12N/S electrics (with two 7 pin sockets) or the 13 pin socket.

The wiring between the 12V positive pin below and the battery is fused on the vehicle but it is recommended to add an additional fuse in your electrics wiring for maximum safety. Choose a fuse with a rating a little over the maximum output of your charger but below the 15A rating of the tow electrics fuse.

Ready Made

Ready made adapters are now available from the site shop:

Buy from the shop from £16.49 + postage

Pinout

12S

The 12S socket is the 'caravan' socket with the white cover:

wiki1_CIMG3747.JPG wiki1_12%20pin.jpg

Pin 3 (31) Ground (Negative)
Pin 4 (R) 12V (Positive)

13 Pin

wiki1_tow1.jpg wiki1_13%20pin.jpg

wiki1_trailer_plug_13pin.png

Note: Pin numbers in the diagram are looking at mating (pin) side of the PLUG or wiring side of the SOCKET

Pin 9 12V (Positive)
Pin 13 Ground (Negative)