The connection for the OBD adapter required (see below) is provided by an OBD socket, no fiddling with getting pins in the right place on the adapter's plug!
Instructions for fitting the loom and downloading and installing the software are available from here: www.disco3.co.uk/fbhdiag
The "Right Hand Drive" version has shorter connections to the crocodile clips, suitable for the battery position close to the FBH on RHD cars. The "Left Hand Drive" version has longer cables to reach the battery on the other side of the engine bay.
Can also be used for other applications of the TTV and TTV evo fuel burning heaters - e.g. Jaguar, BMW. Not suitable for VW, Audi or Skoda heaters as the 8 pin connector is not the VAG type.
If you are intending to use it on a non-Land Rover vehicle please buy the "Left Hand Drive" version so you have enough wire to reach the car battery or other 12V source on the car (e.g. underbonnet positive terminal on BMWs).
to use this loom for diagnostics you ALSO need a simple OBD2 adapter for K-line communications, these are now available from us: click here
Made by us in the United Kingdom.