Harry365
Member Since: 25 Aug 2018
Location: Lincoln
Posts: 373
  
|
Can someone take a look at the vid below and tell me if this wobble is normal? It only exists on one lamp.
I've never had Xenons so I'm not sure if once plugged in, an actuator will eliminate this wobble etc.
Unfortunately I won't have my D3 with me to test this for another week or so.
Ta
Last edited by Harry365 on 17th Feb 2022 3:06 pm. Edited 1 time in total
|
 15th Feb 2022 3:53 pm |
|
|
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4162
  
|
Definitely doesn't look right to me ! The xenons will move up and down when they start up but that's done by the motor and is part of the beam adjustment process... nothing should be that loose !  I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
|
| 15th Feb 2022 4:47 pm |
|
|
Harry365
Member Since: 25 Aug 2018
Location: Lincoln
Posts: 373
|
Nope, doesnt seem right to me.
Id rather not open up the unit to investigate. The last time I did this, despite my best efforts to seal it properly, resulted in moisture.
I also have the chance to return it if faulty as they only arrived today and opening it up could void that. Hopefully someone will give a definitive answer.
The other unit does actually move like the "broken" one, it just has actuator resistance.
|
| 16th Feb 2022 12:45 am |
|
|
