Jondotnet
Member Since: 24 Dec 2020
Location: North York’s
Posts: 97
|
| Brake servo oil problems - 2006 D3 |
|
Hey folks,
Had a braking issue a few days ago where the brakes were fine whilst slowing but after releasing the pedal and then pressing again, it was like trying to brake my 109 and had to stand on the pedal to stop. Not done it since though.
Did a bit of reading on the forum and it looks like mine has the pipework from the recall but I popped open the pipe and there was a trace of oil in there.
Having read a few posts, I am still not sure of what the fix is.
If the pipework indicates a recall has been done, is it new servo, new vacuum pump or both?
Cheers
|
 22nd Mar 2021 11:46 am |
|
|
|
|
Jondotnet
Member Since: 24 Dec 2020
Location: North York’s
Posts: 97
|
Great!
Doesn’t sound cheap. I will add it to the list along with new front diff, 4 new injectors, new suspension valve block and new ride height sensors 
|
| 22nd Mar 2021 9:30 pm |
|
|
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2080
 
|
Disco_Mikey wrote:New Vac pump and new servo required
You may need a new master cylinder , it was included in the original recall if found to be oil contaminated .
|
| 23rd Mar 2021 10:13 am |
|
|
Jondotnet
Member Since: 24 Dec 2020
Location: North York’s
Posts: 97
|
Even better
How bad is the design that it results in a new vacuum pump, servo and a master cylinder.
|
| 23rd Mar 2021 12:06 pm |
|
|
