Magnetic mount is great for temporary installations. K40 Magmount was one of the best CB antennas money could buy. You will make a nice circular mess of scratches on the roof if you leave a CB mag-mount on for any length of time.......The older I get, the more I realise that people confuse wrinkles for wisdom
Founder member of Club FFRRV
Club Orange, Mint or Fruit
Club Walnut Sniffers
31st May 2008 10:28 am
Andycapper
Member Since: 09 Sep 2007
Location: Melbourne
Posts: 70
Thanks - do you think you could avoid that problem - and have it still hang on - if you put a piece of transparent self-adhesive film on the spot you were going to mount it...?Have my new year Disco..! Atacama Sand, active diff, active headlights, hi-ice, cooler, sliding loadspace floor, window tint, MP3, Mantec plate, roof rails, mud
Another good CB aerial is the K40. Has the advantages of no big spring at the bottom, and also is easy to remove the whole of the base and whip with a 1/2 turn. No tools. It's also very easy to tune!!
Have had 2 K40's on both accasions the whip snapped and was lost somewhere on a French motorway, the best antenna I have forund is the Wilson 1000, it is expensive but has 40% more gain than the K40, range is excellent and when mated to a 100 watt burner, well it's just It will handle 3000 watts. Plus it has the benefit of a more 'standard' mount, which is great for changing antennas, ie Wilson for road and open work and swap to Valor 300 (just remember to turn the burner off ) for offroading under trees and the like, basic PL259 fitting, I will try to get some pictures.I'm not as good as I once was........but I'm as good once as I ever was.
31st May 2008 12:00 pm
xtc
Member Since: 27 Mar 2007
Location: Hampshire
Posts: 1072
Everyone to their own, the unique twist base is what sells it to me for quick fitting & removal when needed....
With a whip length of only 1.5m it won't have any more gain than the K40, most likely less. Unity gain on 27MHz is about 2.7m with a 1/4 whip, so anything less than that is -dB with coils matching the impedance.
The best you can have is a stainless whip 2.7m long with no coils or gimics, not that practical though for every day use. Off Roading is OK.... But I'd rather be Boating!
31st May 2008 12:45 pm
POINTYED
Member Since: 22 Mar 2008
Location: BURY,LANCS
Posts: 2758
hi
hi
any chance of ordering a cb mount off you[pretty please]
i will gladly pay for it and any postal charges.
it looks like it does the job really well.
dunclife is tooooo short.enjoy the moment.dont worry be happy
club BSS
1st Jun 2008 8:11 pm
xtc
Member Since: 27 Mar 2007
Location: Hampshire
Posts: 1072
That's over to Ray as mine was for a PMR job, sure he'll be on soon, if not PM him . I need to PM him to see where my rock sliders ended up so I'll mention it also!
Cheers, Richard.Off Roading is OK.... But I'd rather be Boating!
1st Jun 2008 8:46 pm
POINTYED
Member Since: 22 Mar 2008
Location: BURY,LANCS
Posts: 2758
cheers xtc
have pm him but if you could mention my name that would be tops
cheers
dunclife is tooooo short.enjoy the moment.dont worry be happy
club BSS
1st Jun 2008 8:54 pm
philhunt
Member Since: 16 Sep 2007
Location: MI5 not 9 to 5
Posts: 1761
Question for Uncle Ray.
Which model of Sirio antenna are you using? I like the look of the tightening lever thingy
1st Jun 2008 11:35 pm
discocuzzy
Member Since: 02 Feb 2008
Location: surrey
Posts: 2752
Snap i think its the sirio 3000 or 4000 with a quick release fitting...Ray, TFC and bobbycrispbox have the same i think.
Guys...can any of you confirm?"you cannot teach stupid people to do clever things"
--------------------------------------------------------
05 plate D3 HSE in Zermat- Gone
11 Plate D4 Landmark in Fuji white- Gone
08 Plate D3 Hse in Buckingham Blue- Gone
58 plate D3 HSE Silver- Gone
10 Plate D4 HSE Stornaway Grey
Thanks - do you think you could avoid that problem - and have it still hang on - if you put a piece of transparent self-adhesive film on the spot you were going to mount it...?
Been there, done that..... Doesn't work! The more you put between the mag and the roof, the more scratches you can encounter. The older I get, the more I realise that people confuse wrinkles for wisdom
Founder member of Club FFRRV
Club Orange, Mint or Fruit
Club Walnut Sniffers
Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049
mine is a sirio but its a bit long bangs on the trees but is flexible enough not to come to any harm
2nd Jun 2008 9:48 pm
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
I have been following this thread with interest as its been years since I used my CB but I know how useful they are in convoy etc. I just realised however that my mag mount is not going to hold on the glass of the Alpine roof!
Has anyone got any recommendations for quick release mounts of any kind that are not magnetic, or should I just bolt something to the roof rail (no rack) - problem is I don't want to have cable hanging around when CB is not in use so would prefer to remove the lot.Disco3 is now gone but not forgotten. Waiting for Disco6 with full aluminium construction weight reduction and hybrid engine...
3rd Jun 2008 11:46 am
xtc
Member Since: 27 Mar 2007
Location: Hampshire
Posts: 1072
I would recommend using one of Ray's mounts with the standard so259 connector and leave the cabling in. When not in use the antenna can be removed and a plastic cover cap fitted to the socket. Very unobtrusive. If you run the cable down behind the top rear tailgate and take it into the vehicle behind the rear light cluster it makes a very neat job. You really would have to be looking to see it! Cable can then be run to the front of the car under the side trim etc. Saves having to faff around with cables etc each time you want to use the CB. Rear light pops out with 2 screws so very easy job. Most on here have done it this way!
Cheers, Richard.
Click image to enlarge
Click image to enlarge
Click image to enlarge
Off Roading is OK.... But I'd rather be Boating!
3rd Jun 2008 12:25 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
It will handle 3000 watts. Plus it has the benefit of a more 'standard' mount, which is great for changing antennas, ie Wilson for road and open work and swap to Valor 300 (just remember to turn the burner off 
) for offroading under trees and the like, basic PL259 fitting, I will try to get some pictures.
i think its the sirio 3000 or 4000 with a quick release fitting...Ray, TFC and bobbycrispbox have the same i think.
