Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

Disco 3 58 2.7 V6 diesel replacement heater matrix
Post Reply  Down to end
Page 1 of 1
tommymcg
 


Member Since: 06 Feb 2023
Location: Dundee
Posts: 19

United Kingdom 2008 Discovery 3 TDV6 XS Auto Orkney GreyDiscovery 3
Disco 3 58 2.7 V6 diesel replacement heater matrix

Hi Folks Thought I would share my experiences in changing the heater matrix in my D3.

New matrix sourced from The Car Heater Shop in Redditch, a quality item manufactured from brass.

Cutting a small access panel in the drivers footwell which has been already covered by one of our Australian friends. Unable to access the screw heads on the inlet and outlet clamps as they were 90deg from the footwell access. No problem, ground of the heads carefully with a die grinder.

Slightly more clearance was needed and eventually the old unit was removed. New unit fitted successfully and as you can imagine what a difference it makes in Jockland !!!!!!

The old matrix shows the blockage at the passengers side and not a hope of flushing it out.
  
Post #236483320th Mar 2024 4:07 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site