maneelna
Member Since: 12 Jul 2008
Location: Belfast
Posts: 2
  
|
| LR007484 Multi Height Towbar Fitting Instructions |
|
Anybody out there got a copy of the fitting instructions for a LR007484 Multi Height Towbar ?
I did have a copy, but the missus chucked them out with the paper waste. I think its fairly straight-forward, but wanted to be 100% certain of prope fitting and torque settings.
A PDF copy would be much appreciated, if possible.
Regards
|
 12th Jul 2008 11:35 am |
|
|
|
|
maneelna
Member Since: 12 Jul 2008
Location: Belfast
Posts: 2
|
Thanks for the prompt reply, unfortunately, I tried the site earlier and was unable to locate any reference to the LR007484 kit. Dont know if it was a kit that has since been replaced by Land Rover, but Britpart still list it as an option.
The fitting instructions for the Multi Height kits still listed on the Owners site differ slightly in bolt styles, although the location points are the same. The bolts that go through the chassis in the LR007484 kit are like large pins with threads for a nut on one end and a bolt on the other. The end that will take the nut also has a projection with a much thinner diameter and a hex end.
Wil try a trial fit in the meantime.
|
| 12th Jul 2008 11:58 am |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
it might be the slightly older kit that had a flat mounting plate? They were re-called to be fitted with one that had a 'wing' on each side due to a problem of some sort.
get it fitted & then take it to your dealer for the fix 
I think it was one incident that caused the issues when mounting the towball high up, with a lot of weight on it. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 12th Jul 2008 12:03 pm |
|
|
The Large One
Member Since: 20 Apr 2007
Location: Down the polytunnel
Posts: 6143
 
|
Hi maneelna
go for the fitting instructions labeled LR005740
that's the earlier part number kit which i think should sort you out
Nick TLO has left the building.......
I no longer work for a Landrover Dealer
My little chilli sauce business http://www.thechillees.co.uk
if you would like to order anything just give me a shout
Last edited by The Large One on 12th Jul 2008 10:10 pm. Edited 1 time in total
|
| 12th Jul 2008 12:07 pm |
|
|
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
 
|
And remember the bolts on the chasis undo from both sides, not just one Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
|
| 12th Jul 2008 3:59 pm |
|
|
