Member Since: 21 Oct 2016
Location: kent
Posts: 13657
how to remove memory module to basic 8 x way drivers seat
Hi
This will be work in progress as I edit and add to this thread
Objective , the removal of the drivers seatmemory module and fit an ordinary electric loom and 8 x way seat switch
Bit of history , had standard manual seats , my D3 is a base model , upgraded them to electric , passenger seat was plug and play
Drivers seat had memory ECU fitted , done bypass which allowed the few second power burst and seat to work
Had to disable memory ECU because it was causing a battery drain
Pics below are the current memory loom
Last edited by gstuart on 28th Sep 2018 12:36 pm. Edited 5 times in total
26th Sep 2018 10:37 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Memory loom , controls 4 x motors , 8 way
Pic of memory loom and seat switch
Plugs to motors
Green
2 x whites
Grey
Black
26th Sep 2018 10:39 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
These are the plugs that are attatched to memory loom and these will be the ones I need
26th Sep 2018 10:44 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Now to go onto the 8 x way non memory switch
26th Sep 2018 10:48 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
RRS Passenger Non memory 8 x way loom ( plugs missing in comparison of what’s req )
YML 501400
Last edited by gstuart on 26th Sep 2018 10:58 pm. Edited 1 time in total
26th Sep 2018 10:50 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Another LHD 8 x way non memory passenger loom ( also plugs missing that’s req )
Part No. YML501360
Last edited by gstuart on 26th Sep 2018 10:58 pm. Edited 1 time in total
26th Sep 2018 10:52 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Will now have to go through each wire by colour and plug type
26th Sep 2018 10:53 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Look at parts manual , the following are suppose to be drivers 8 x way looms
These are the looms, don’t know how they differ
All “ YML “ prefix letters
YML500373
500801
500871
500881
500891
In the mean time will carry will cut the memory loom open and trace each wire / colour / plug one by one
Hoping I’ll be able to adapt one of the looms, not worried about colours of the wires
Will update the thread when I make some progress , just hope this may help others later on
26th Sep 2018 11:03 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Before I touch the memory loom, this is the wiring memory module bypass adaption for the 2 x second power seat burst
26th Sep 2018 11:32 pm
Erea
Member Since: 19 Mar 2012
Location: Munster
Posts: 1509
I’d be interested to see how you get on with this mod. From memory I don’t think I did as much wire changing as you to get my seat to work with the two second bursts.
26th Sep 2018 11:56 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Hi
Indeed , I did do the mod to have the 2 x second burst , I’m now removing the memory module so that I can have constant power to the seat
Had to remove it because it was causing a 0.30 ma battery drain
Have now cut open the memory loom , so I can see what colour wires, pin terminals location , etc and how they join with each other
Can see this taking me a while, but find things like this interesting and indeed hope it helps others in the future if instead doing a memory bypass can get constant power to the seat
Well that’s the theory anyway
Also included the connector I need to each motor
Both White connectors ———-front seat base rise
Black ——- forwards / backwards
Green —- back seat recline
Grey ———- up/ down
Will have to double check those
Memory loom cut open
New non memory 8 x way switch
27th Sep 2018 12:39 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Also as a side note ref the black wire connector that sits underneath the seats
U can’t plug the wrong colour connector into it, they are all keyed differently
27th Sep 2018 1:07 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Hi
Wished to update this thread , can remove all the memory module and have a seat with constant power
After going through the loom etc today I now have a fully functioning seat , full 8 x way with no relays or memory module
Will take me a few days to alter some plugs , tidy the loom up properly , etc
Can then write it all out and how it’s done step by step
27th Sep 2018 4:31 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10365
well done phew!
27th Sep 2018 8:22 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13657
Thks pete
I do enjoy gluten for punishment
But must admit do enjoy doing projects like this
Just soldering up a couple of connectors , will then be done
Can do a write up then, longest bit was tracing all the wires / checking voltages
At least a normal loom and non memory switch can be fitted and get constant power to the seat ( without battery drain as well )
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum