John C
Member Since: 28 Aug 2007
Location: East Yorkshire
Posts: 3292
|
When to replace discs and pads please? |
|
Had the following reported on a service a couple of weeks ago:
Front pads 5-6mm
Front discs at 27.3m (New set of discs with next pads)
Rear pads at 7-8mm
(And my rear discs were recently replaced I think).
Are any of these ready to change please? I want to have a go at it myself, but understand that the sensor wire is a pain to change, so I'd like to do it before the warning kicks in.... but not too soon!
Thanks,
John 2020 SDV6 D5 HSE, Carpathian Grey +
2022 Tesla Model Y LR... almost Carpathian Grey
Previously : 2005 TDV6 SE Auto, Cairns Blue (288K) - ours for 16 years
|
20th May 2008 6:25 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26702
|
I think minimum pad thickness is 3mm. Yes the sensor wire is a pain, but possible. I find it helps to remove some clips from the wheel arch liner to improve access.
|
20th May 2008 8:15 pm |
|
|