Member Since: 21 Oct 2020
Location: Hemel Hempstead
Posts: 4
RR Sport centre dash retrofit in D3
Hello, Hope someone can help?
I’m sure i have seen on here a thread about fitting the centre dash controls and console from a RR sport in to a D3….
I have searched the forums but I can not find it!
Can someone point me to a link?
Thanks…
12th Aug 2021 8:43 pm
KulikovPN
Member Since: 30 Jul 2019
Location: Moscow
Posts: 20
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 407
I like that idea
16th Aug 2021 10:46 am
thameside
Member Since: 06 Jun 2021
Location: Essex
Posts: 12
Been thinking about this myself I prefer the RR sport dash to the D3 but replacing the radio with a touch screen only problem is I have got a manual.
Does anyone know if anybody else has done this modification?
16th Aug 2021 2:02 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
Looks good, wonder if all connections are plug and play. Then what was the cost of the parts.
19th Aug 2021 2:20 am
D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 407
Just ordered bits off eBay ( Hopefully right ones ) So Bank Holiday project coming up
21st Aug 2021 5:39 pm
Jasperd3
Member Since: 21 Oct 2020
Location: Hemel Hempstead
Posts: 4
Retrofit
Hi, Please let us know how you get on
I translated the Russian, and he says its plug and play!!
Do you have a list of what you ordered?
Jasper
25th Aug 2021 8:28 pm
D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 407
Will do.. hopefully going to have a go at the weekend.
I've got most of the bits ordered I think, although one or two of the heater vent housings are proving a bit difficult to find.
I'll make a list when I've put it together and check everything's good to go
25th Aug 2021 9:20 pm
D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 407
Finally made a start today ..
5th Sep 2021 10:12 pm
Jasperd3
Member Since: 21 Oct 2020
Location: Hemel Hempstead
Posts: 4
Sport retrofit
Hi. Did you finish your project?
I’m about to start and wondered if you have any advise.
Eddie
14th Oct 2021 9:14 pm
D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 407
Yes, all finished now and really pleased with how it looks
I ended up taking it all out again on more than one occasion as I hadn’t done it in the correct order. For example the glove box frame needs doing first, as one of the mounting bolt positions is behind the console mounting frame. Also took a few attempts to get the wiring loom in the correct position before it was long enough to reach the new switch positions.
Did you get a new gear selector cable, the original d3 one is too short ?
I’m away at moment, will post a few pics when I get back tomorrow night.
If you get stuck with anything, feel free to message and I’ll try and help.
14th Oct 2021 10:23 pm
D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 407
This gives an idea where I positioned the harness ( not necessarily correct, but worked for me )
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
