Dangerous
Member Since: 06 Aug 2017
Location: Suffolk
Posts: 108
  
|
| Rear number plate plinth gasket PN or where to buy? |
|
Hello folks, I replaced my upper tailgate switch as a wire had snapped, when I removed the plinth, the gasket / seal foam looking bit had fallen to bits.
Does anyone know what is called, the part number and / or where to get a replacement?
Cheers.
|
 31st Dec 2020 5:49 pm |
|
|
Dangerous
Member Since: 06 Aug 2017
Location: Suffolk
Posts: 108
|
Anyone? I still can’t fine one.
|
| 4th Jan 2021 8:42 pm |
|
|
|
|
Dangerous
Member Since: 06 Aug 2017
Location: Suffolk
Posts: 108
|
Yes, thank you ever so much!
|
| 4th Jan 2021 9:19 pm |
|
|
|
|
Dangerous
Member Since: 06 Aug 2017
Location: Suffolk
Posts: 108
|
Well, I’ve tried twice bow to order one and both came back after payment had been made to say they’re unavailable and now ETA on availability.
“ Unfortunately, DRK100041 is on backorder from Land Rover with no ETA and thus, is not available to order. Now this has been brought to our attention, we will be taking the part off our website.
I have done a full European dealer search and there are no suppliers currently showing one of these in stock. Therefore, we have had to cancel your order. Our accounts team will refund you in full.”
Great 
|
| 8th Jan 2021 4:14 pm |
|
|
fusion158
Member Since: 08 Apr 2014
Location: California
Posts: 61
  
|
Rimmer Bros is showing it in stock with their supplier
https://rimmerbros.com/Item--i-DRK100041
I'm also checking availability over here.
|
| 8th Jan 2021 4:55 pm |
|
|
Dangerous
Member Since: 06 Aug 2017
Location: Suffolk
Posts: 108
|
Given it a go thanks. Might be third time lucky!
|
| 8th Jan 2021 5:16 pm |
|
|
fusion158
Member Since: 08 Apr 2014
Location: California
Posts: 61
|
Dangerous wrote:Given it a go thanks. Might be third time lucky!
Let me know how it goes. If it doesn't work out I may have found one over here I could help you get.
|
| 8th Jan 2021 6:15 pm |
|
|
|
|
Dangerous
Member Since: 06 Aug 2017
Location: Suffolk
Posts: 108
|
fusion158 wrote:Dangerous wrote:Given it a go thanks. Might be third time lucky!
Let me know how it goes. If it doesn't work out I may have found one over here I could help you get.
Thank you
|
| 8th Jan 2021 6:35 pm |
|
|
|
|
Dangerous
Member Since: 06 Aug 2017
Location: Suffolk
Posts: 108
|
Email today:
“ We regret that we have been unable to obtain the part(s) listed below as they are now no longer available.”
And so it goes on.
|
| 12th Jan 2021 4:07 pm |
|
|
fusion158
Member Since: 08 Apr 2014
Location: California
Posts: 61
|
I've contacted 2 suppliers over here to see if they have it in stock. I will let you know.
|
| 12th Jan 2021 5:16 pm |
|
|
Dangerous
Member Since: 06 Aug 2017
Location: Suffolk
Posts: 108
|
I think I’m going to end up making one!
|
| 12th Jan 2021 5:42 pm |
|
|
