Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

Modifying my CCF file
Post Reply  Down to end
Page 1 of 1

Member Since: 03 Nov 2019
Location: Elland
Posts: 1

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Zermatt SilverDiscovery 3
Modifying my CCF file

Hello all, my first post. This may not be the best heading to post this under but I've struggled to even find the original post relating to this subject! I have done the screen modification to my D3 to display the reversing camera in RR mode (thanks to Wiggs, SantiD3 et al). I have installed a switch to select either mode and the diode to maintain screen brightness, all is working as it was expected but now I need to find someone, in or around the West Yorkshire area who could alter the CCF file so that it will show the camera automatically rather than going via the diagnostics screen. Many thanks.
Post #210560213th Dec 2019 1:50 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >

Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

DISCO3.CO.UK Copyright © 2004-2022 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site