viagression
Member Since: 07 May 2018
Location: broome
Posts: 64
  
|
| Amk / arnott compressor pipe fitting |
|
Hi all,
2007 disco 3 tdv6.
I just bought a new compressor p-2645.
This seems to be different from older posts I've seen.
Any way, the forward j pipe on the car seems to get replaced with a larger diameter one, that didn't come with my compressor.
Found part numbers for the repair kits but nothing locally so will need to wait for delivery. (Australia)
Can I swap the fitting on the compressor with the one off the old compressor and use the smaller pipe for a while?
Or if any one has different part numbers for the extra install bits I can try searching.
Cheers.
|
 8th Oct 2022 8:15 am |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
|
Maybe just swap the end plate
|
| 10th Oct 2022 6:17 am |
|
|
viagression
Member Since: 07 May 2018
Location: broome
Posts: 64
|
Sorted, I think.
Got some pipe from local suppler.
Removed fitting from old compressor dryer, which was actually a new dryer.
The pipes are not different diameter, but length
Old voss connector on valve block gets swapped out with quick connect and longer pipe.
Just need to shape the hose. Should be good.
|
| 10th Oct 2022 6:25 am |
|
|
