discoNumT
Member Since: 26 Apr 2016
Location: Walvis Bay
Posts: 2
|
problems after body removal and refit |
|
hay guys,
I am having a couple of issues. 3 months ago my timing belt bolt broke off and hit a few valves. turns out engine is fine, so I bought 2 second hand heads and fitted all. this week I fitted the body (after 2 and a half months apart) connected all the plugs, earths etc. as per Disco_Mikes awesome guide but now I have problems:
I see on my fault finder it is not reading the engine ecu nor the auto box ecu.
got a massive E on the dash, and the whole Christmas tree. Hazards will not stop coming on.
I am hoping that it is just a connection somewhere but would like to get some advice.
DiscoNumT
|
2nd Jun 2017 7:27 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10405
|
check them connections behind the battery
to the ecu's and under the battery.
Remove the battery so you can get a proper look and investigation.
|
2nd Jun 2017 12:04 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6252
|
Also check the one in the front passenger side behind the wheel arch liner as well as the ones mentioned above, especially the grey and black plugs.
Flack
|
2nd Jun 2017 3:31 pm |
|
|
|