Member Since: 30 Nov 2019
Location: south newton
Posts: 375
Wheel stud aligner
Hi
I am struggling to get my wheels on and off I have made the socket and pin for the bottle jack and struggle to get the wheel off the ground,I have tried with suspensions locked at off road and suspensions at access mode and at normal height and still have to jack the car up into the heavens to get the wheel off.
I have read on the forum about the several ways to remove the wheel none seem to work.
And yes I have been changing wheels all my life and I have never ever come across such a stressful time as the land rover.
Any ways the main question is has anybody seen these wheel line aligner assistance those wheels are bloody heavy for me at my old age and have seen these on a American website and can't find them anywhere in the uk
Any help would be grateful
See the pictures
29th Jun 2020 9:00 am
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
I bought a set the last time there was a group buy on here, valuable asset for the old toolbox
may be worth contacting the member to see about another group buy
Member Since: 16 Jan 2020
Location: East/West Sussex Coast Borders
Posts: 1198
Count me in if this happens.
Dave2011 Discovery 4 Commercial SDV6 (Gone)
2010 RRS TDV8 (Gone)
1980 OBLIC 4.0ltr Range Rover (went a long time ago)
29th Jun 2020 9:16 am
Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
I have just PM the guy and asked if he could do something again for us all.
will let you know when I do
Pete
29th Jun 2020 9:33 am
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
I tried to get some in the past but missed out and they arent being produced any longer by the member who was having them made, I didnt think he was still using the forum but I ve just checked his profile and see he is.
Therefore if they are still being made I will have a set.
If he isnt able to offer them any longer I have a contact in the engineering world who previously said he could make some up if I gave him a file to machine it from, as I had said they needed to taper rather than be a simple threaded bar.
I had kept meaning to do it but never found the time to sort a CAD file but aclually did the basis of it on my iPad last week, based on measurements i had taken from a wheel nut.
I will send him over a file and get a price for producing a batch, as Im sure there is enough interest to offer them. Based on the price I get I will set up a group buy if there is enough interest.
Darrin
(Edit - see comment about availability)Must stop buying shiny toys....
Last edited by darrind on 29th Jun 2020 9:43 am. Edited 1 time in total
29th Jun 2020 9:35 am
Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
Sorry forgot to say thank you
29th Jun 2020 9:35 am
Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
Ok great let us know and thanks.
You think though these would be quit a common item due to the weight and awkwardness of the wheel.
(Talking to the older generation of us now(65+) and of course the ladies young and old).
When you are down, you could have a look at my set, which may be going spare ......
RikDiscovery 4 HSE SDV6 Baltic Blue
Discovery 3 S TDV6 Zambezi Silver - Now gone........
Leicestershire & Rutland 4x4 Response
29th Jun 2020 9:57 am
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
Must stop buying shiny toys....
29th Jun 2020 10:05 am
Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
The member who made a collective purchase in 2017 has tried to contact the maker without success.
He will attempt again in a few weeks.
In the meantime if anyone has some for sale please message me and in the meantime will still keep looking
Thanks
Pete
29th Jun 2020 10:07 am
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
Anybody tried Land Rover spares, they supply them with newer carsL633 Defender
Range Rover Velar-gone
Discovery 4 Landmark-gone
Gap IID Tool
29th Jun 2020 10:31 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4399
I have made these in the past, for myself and a couple of other people. I find one aligner is more than good enough, with the tapered lead, it's really quite easy to get the wheels on and off. If you use them to take the wheels off, it stops you dropping the wheel on to the brake caliper or back plate
I could be persuaded to make a batch, if there was interest? I'll price up a batch of 25 and 50 and see how it looks.
Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
29th Jun 2020 11:43 am
Trucks
Member Since: 30 Nov 2019
Location: south newton
Posts: 375
Good man put me down for em and you should get enough I do hope so
29th Jun 2020 12:28 pm
Trailered Movements
Member Since: 16 Jan 2020
Location: East/West Sussex Coast Borders
Posts: 1198
And I'll have 2.
Dave2011 Discovery 4 Commercial SDV6 (Gone)
2010 RRS TDV8 (Gone)
1980 OBLIC 4.0ltr Range Rover (went a long time ago)
29th Jun 2020 2:37 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
I only ever use the one of them when taking and putting a wheel off/on
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
