Just a reminder please follow the supplier instructions when fitting, in this cold weather ensure the grille and badge are warmed before you fit it
beanie wrote:
Fitting instructions for the badges
Basically remove the old one, best to screwed the centre of the badge with a flat blade screwdriver or similar, then warm it a little to soften the glue and work it off from the centre out, if you attack the outer edges, your liable to damage the grille
Then clean the area with an alcohol solvent, NOT WHITE SPIRIT warm the grille and badge with hair dryer, apply the badge to the grille, use a clean cloth to assist smoothing out and keep it warm as you shape it to the grille
Be warned like the OEM metal foil badges, FITTING IS A ONE SHOT DEAL
This is how they look fitted to one of my modded grilles
Click image to enlarge
And close up,
Click image to enlarge
Fitting is simple, I used a bit of panel wipe / degreaser on a paper cloth, then warmed the grille and badge with a heat gun before applying
I find it easier to cut the backing off level with the badge, this allows you to position it, then part peel the backing off, place back in position, apply then remove the remainder :thumbsup:
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
14th Nov 2013 7:53 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
Outstanding Beanie, anyone should be able to follow that step by step FFRR SC 4.2
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
... 
