Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
JamalRawal wrote:
Would it be possible to fit a dual view touchscreen from an RR Sport MY11-12 to a MY13 D4 then? So passenger can watch TV as we drive
No dual view or not I’m sure it’s the same as a normal one and goes off once I start driveing as that’s the law nothing is allowed on a front tv screen apart from satnav reallyDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
16th Oct 2018 8:53 pm
Gerd1986
Member Since: 17 Oct 2018
Location: Ilford
Posts: 12
Hi James,
Have you tried this on a sport yet? I have recently put a 10.4 inch Android unit in the dash but would be interested in doing this mod also. I have an GAP tool to send you any details you need.
Member Since: 17 Jan 2010
Location: Holmfirth
Posts: 732
Resistance is futile.... be one with digi-dash 😜😁😜RLD CB Bracket
RLD Spare Wheel Protector
RLD Sump Protector
ProSpeed Compressor Cover
TPMS Retrofit
Range Rover Digital Dash Upgrade
Tesla Style Android Screen Upgrade
17th Oct 2018 9:32 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Gerd1986 wrote:
Hi James,
Have you tried this on a sport yet? I have recently put a 10.4 inch Android unit in the dash but would be interested in doing this mod also. I have an GAP tool to send you any details you need.
No mate don’t have a dash to
Work withDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
17th Oct 2018 10:00 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Well cheap if anyone wants to grab it quick before it goesDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
17th Oct 2018 10:20 pm
dorianwoolger
Member Since: 11 May 2018
Location: Tangmere
Posts: 223
Got a dash a while back and just got round to ordering the EEPROM programmer. Any recommend software for Mac?Dorian Woolger
Amateur Call: 2E0FSI
Member Since: 17 Oct 2018
Location: Ilford
Posts: 12
That was the one I was looking at last night.
18th Oct 2018 8:03 am
Gerd1986
Member Since: 17 Oct 2018
Location: Ilford
Posts: 12
Snapped that up now, @james you have a PM.
18th Oct 2018 8:04 am
dgarside
Member Since: 17 Jan 2010
Location: Holmfirth
Posts: 732
Didn’t end up getting the Mac software (command line) to work for downloading/uploading the EPROM, so ended up using my Parallels Windows 7 and Windows based software. I then used iHex on the Mac OS to edit the binary file, compare and copy between new cluster and old Discovery cluster. As James as said multiple times, it’s not straight forward but I’m glad I stuck with it (Thanks again James).
Just this second finished putting the dash back together with new internal cover for the binnicle (cracked when I took off). Just waiting on IID Tool to arrive which I hoped would be here this week as in stock at Duckworths, but seemed not after I paid. Ended up doing a few mods to the plastic dashboard interior with my Dremel to get it to fit and then drilled/tapped (M5) new screw holes secure it.
The biggest problem besides the EPROM programming is getting the new cluster back in with the cover (vinyl cover bit) in place. As per previous post by Neil, I ended up mullering mine and will be recovering it at some point in the future.
Good luck all and really happy now nearly complete.RLD CB Bracket
RLD Spare Wheel Protector
RLD Sump Protector
ProSpeed Compressor Cover
TPMS Retrofit
Range Rover Digital Dash Upgrade
Tesla Style Android Screen Upgrade
20th Oct 2018 4:52 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
I muffed mine up as well waiting for one to come
Up on eBay
I damaged the leather dash cover the first time I took it out second time I took steering wheel and surround off and much easier without any damage
Well worth the few minutes more to take the wheels off in my opinionDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
20th Oct 2018 7:22 pm
dgarside
Member Since: 17 Jan 2010
Location: Holmfirth
Posts: 732
What James says 👍RLD CB Bracket
RLD Spare Wheel Protector
RLD Sump Protector
ProSpeed Compressor Cover
TPMS Retrofit
Range Rover Digital Dash Upgrade
Tesla Style Android Screen Upgrade
20th Oct 2018 7:51 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
robpenrose wrote:
Can you still check the oil level etc?
Yes mate all as beforeDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
20th Oct 2018 10:29 pm
Sharpy1980
Member Since: 16 Mar 2017
Location: Kent
Posts: 81
After being inspired by James I thought I’d have a tinker with my Rrs and a spare D3 cluster just to get my head around the eeprom programming before investing in a dash to try and get it working in the earlier models, the only trouble is now my car no longer starts I was struggling to read the hex and asc11 and translating it into anything other than the dash serial no and part no.s so I decided to read the dash from my car for comparison and fit the spare to get the actual mileage and vin so I knew what to look for, after doing a read on my cluster I decided to write that file to the spare cluster, the spare cluster now shows the correct mileage & vin but my car wouldn’t turn over so I fitted the correct cluster and even tho I didn’t edit the file it still won’t turnover and there’s no fault codes showing wooopsie.Current
2007 Discovery 3 SE Tdv6 Zermatt
2007 RRS HSE Tdv8 Zermatt
2007 RRS HSE Tdv8 Lugano Teal
Gone
1999 D2 Td5 XS Facelift Java
2000 Freelander who cares
1986 Defender 90 200 Tdi Blue
1996 D1 V8i ES Green
1994 D1 200 tdi S Grey
21st Oct 2018 6:04 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
I cannot see how a later rr sport (+09) will work in a d3 to be honest the can speeds are different so I carnt see how the car can read to requires info from the cluster to the car
If you haven’t touched the old cluster apart from read it I don’t see why it won’t startDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
21st Oct 2018 7:02 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
The code on the chip is surpose to be like that
You will see your vin and you will see the cluster model number
Everything else in encrypted so will look
Like rubbish but beleave me it’s notDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I was struggling to read the hex and asc11 and translating it into anything other than the dash serial no and part no.s so I decided to read the dash from my car for comparison and fit the spare to get the actual mileage and vin so I knew what to look for, after doing a read on my cluster I decided to write that file to the spare cluster, the spare cluster now shows the correct mileage & vin but my car wouldn’t turn over so I fitted the correct cluster and even tho I didn’t edit the file it still won’t turnover and there’s no fault codes showing wooopsie.
