LR3meister
Member Since: 20 Jun 2011
Location: Maryland
Posts: 2
|
I have an error that comes up suspension height cannot be changed and must stay at normal height. It happens after I start the 2005 LR3. I also notice what sounds like a pump (compressor?) struggling before the error comes up. I have heard that the problem could be a sensor, compressor, dryer issue. I imagine this would have to be investigated by an authorized LR mechanic.
I have 2 questions. I never use the ride height adjustment.
1. Will having this error cause any problems if it goes unattended?
2. Is there a way to turn off or defeat the ride height? Fuse etc?
Thanks.
|
 20th Jun 2011 1:29 pm |
|
|
jjvd21
Member Since: 16 Jul 2007
Location: Chicago
Posts: 1070
  
|
I had the same symptoms last year. My compressor was on it's way out. Dealer replaced under warranty. Problem solved. 16 D4 Landmark
05 D3 HSE V8
THE original D4 spotter
|
| 20th Jun 2011 1:49 pm |
|
|
LR3meister
Member Since: 20 Jun 2011
Location: Maryland
Posts: 2
|
Thank you for the information. Unfortunately mine is out of warranty. 
Dealer says $175 to diagnose.
|
| 20th Jun 2011 2:04 pm |
|
|
John C
Member Since: 28 Aug 2007
Location: East Yorkshire
Posts: 3292
  
|
If you turn the engine off as soon as the light comes on, does the compressor keep running? In which case, it could be something as simple as a relay sticking on.
John 2020 SDV6 D5 HSE, Carpathian Grey +
2022 Tesla Model Y LR... almost Carpathian Grey
Previously : 2005 TDV6 SE Auto, Cairns Blue (288K) - ours for 16 years
|
| 20th Jun 2011 3:39 pm |
|
|
