Member Since: 10 Aug 2012
Location: Rutland
Posts: 415
prop shaft bolt. help. quick
Morning all.
Booked day off work to sort car out. 1st and most important job is to replace rear prop but what socket is used to remove bolts A specialist tool or will Halfords have one as my 9is too tight and 10 too loose
Help. Ta2inch Lift, 33inch Cooper STTs, Wheel Spacers, Hidden Champion 9000lbs Winch with recovery points, Full Underbody Protection including Rear Bumper Guard, Rock Sliders, Snorkel, 4x4 screen enabled and Sat Nav on the move (thanks to Bodsy), Discreet LED roof lights, LED work light, BAS Re-map and EGR's blanked, V8 Brake upgrade with Grooved, Drilled and Slotted Brakes, Halo Fog Lamps, Roof Rack, 240V Inverter, CB radio and finally a Swing away wheel carrier with Hi-Lift mount...
12th Feb 2014 10:09 am
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
Aren't they a torx head socket !!MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
12th Feb 2014 10:11 am
lrserviceandrepair Site Sponsor
Member Since: 20 Sep 2012
Location: York YO19 6QL
Posts: 136
Not a mechanic so apologies if its incorrect D4 Front upgrade/cut back wings n things 'taking a long time but getting there'.
D4 rear upgrade - Narpys helped with that bit
Flack for problem solving and D4 Bluetooth Install/ D4 Heated Steering wheel with Flappy paddles n BBS enabling kit
Disco Mikeys work - Serviced, EGR blanking and 4x4 software upgrade, 3 flash indicators.
B.A.S - FBHIC. Uncle Rays spare wheel protector. Beanie Silver Black badges.
12th Feb 2014 10:20 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20732
An E12 and an E14 (female torx) socket is needed for the rear prop My D3 Build Thread
Member Since: 10 Aug 2012
Location: Rutland
Posts: 415
Done. Thanks. Bolts were om to do. Getting prop of rear flange however. What a 2inch Lift, 33inch Cooper STTs, Wheel Spacers, Hidden Champion 9000lbs Winch with recovery points, Full Underbody Protection including Rear Bumper Guard, Rock Sliders, Snorkel, 4x4 screen enabled and Sat Nav on the move (thanks to Bodsy), Discreet LED roof lights, LED work light, BAS Re-map and EGR's blanked, V8 Brake upgrade with Grooved, Drilled and Slotted Brakes, Halo Fog Lamps, Roof Rack, 240V Inverter, CB radio and finally a Swing away wheel carrier with Hi-Lift mount...
12th Feb 2014 2:09 pm
lesdisco3
Member Since: 17 Feb 2013
Location: Northamptonshire
Posts: 18
That's great, I've got a set in my tool box, so fingers crossed it all goes well as myself and the family are traveling from Northampton to Loch ness and the Highlands next Saturday morning.
Thanks.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Torx socket 12 
