Member Since: 30 Apr 2013
Location: York
Posts: 512
It's a Disc-grrrr-very!
I've just installed 'Johnson lift rods' and 17" alloys with Maxxis Bighorns... It scares me, but thrills me at the same time
On a side note, driving over 30mph I start to get a warble from the tyres that gets higher pitched the faster I go... anyone know if this will quiet down as the tyres wear in?
Click image to enlarge
Before
Click image to enlarge
Afterwhat is this life, if full of care?
we have no time to stand and stare.
15th Jun 2014 12:25 am
yogi972
Member Since: 05 Jun 2011
Location: Kineton
Posts: 3372
It matches your house.....
15th Jun 2014 12:33 am
r4ff
Member Since: 30 Apr 2013
Location: York
Posts: 512
That's the neighbours.... I did the car first what is this life, if full of care?
we have no time to stand and stare.
15th Jun 2014 12:34 am
chickensnax
Member Since: 19 Feb 2013
Location: London
Posts: 29
Weĺl that's different!
Didn't know discoveries could be lifted.. how's thw ride
love the wheels
21st Jun 2014 7:24 am
r4ff
Member Since: 30 Apr 2013
Location: York
Posts: 512
The ride is a bit bumpy until my suspension bushes get sorted at the start of next month, but you definitely feel the extra height climbing into the thing :-p
The lift rods just replace the stock plastic rods between the height sensor on the body and, I think it was the upper wishbone... the old rods were seized in place and 1 or 2 were were stuck at slightly odd angles, but replacing them while removing the wheels made the job easy as pie That and a little bit of washing up liquid on the rubber grommets when installing the new rods...what is this life, if full of care?
we have no time to stand and stare.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
That and a little bit of washing up liquid on the rubber grommets when installing the new rods...
