Red7
Member Since: 03 May 2015
Location: Stockport Cheshire
Posts: 18
  
|
evening guys , just wondering if any body knows how on earth do you set the remote let fob to lower the car upon pressing the unlock button ? I know it's something to do with pressing the Land Rover button but every time I press that it just opens the boot lol 😩 The louder you scream the faster the ride
|
 19th May 2015 6:25 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
 
|
Hold the LR button for 5 seconds, then (whilst still holding it) press the Suspension lower button down. you should get a beep from the car.
ISTR it will only work with the hazard lights on. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 19th May 2015 6:33 pm |
|
|
Red7
Member Since: 03 May 2015
Location: Stockport Cheshire
Posts: 18
|
Does the ignition have to be on ? Every time I press the LR button it opens the boot ?? The louder you scream the faster the ride
|
| 19th May 2015 6:36 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
No Ignition as you should have the key in your hand.
It will open the boot when you press it, so you need to do the following.....
"Hold the LR button for 5 seconds, then (whilst still holding it) press the Suspension lower button down. you should get a beep from the car. " Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 19th May 2015 6:47 pm |
|
|
Red7
Member Since: 03 May 2015
Location: Stockport Cheshire
Posts: 18
|
Tried that getting no beep and no other response other than the boot opening ! Getting frustrated as I thought it would be a simple procedure 😓 The louder you scream the faster the ride
|
| 19th May 2015 6:51 pm |
|
|
DanRutter22
Member Since: 10 May 2014
Location: Staffordshire
Posts: 207
 
|
Program the key fob 'Land Rover' button
The Land Rover button of Discovery 3's key fob (bottom of the 3 buttons, with the 'Land Rover' logo on it) can be programmed to do one of four things - trigger the panic alarm; turn on the 'follow-me-home' headlights; raise or lower the suspension; or release the upper-rear tailgate.
To set the panic alarm, insert the key in to the ignition (position two) and then remove the key from the ignition. Immediately after, hold down the Land Rover button on the key fob whilst pressing the hazard warning light button on the dashboard.
To set the remote to turn on the headlights, insert the key to position two and then remove it. Hold down the Land Rover button on the key fob whilst flashing the headlights (by pulling the headlight control stalk). The amount of time the lights remain on for depends on the headlamp delay setting (which can be changed within the Settings menu of the digital display).
To set the remote to raise or lower the air suspension, turn off the engine and remove the key. Within one minute, press and hold the Land Rover button on the key fob whilst pressing the air suspension control lever on the Terrain Response area of the centre console (to either position, up or down). The suspension can then be adjusted using the remote key fob. The hazard warning lights must first be turned on and all doors closed. To raise the suspension, hold down the Land Rover button whilst pressing and holding the lock button. To lower the suspension, hold down the Land Rover button whilst pressing and holding the unlock button.
To set the remote to release the tailgate, press and hold the Land Rover button on the fob and then release the tailgate (either by opening in outside or by pressing the Lock and Unlock buttons on the dashboard together). D4 Black 2012
Black grille, window tints all round, rear entertainment, video in motion lead, rear spoiler, window deflectors + more
D3 Stonoway Grey 2009 with mods!
D3 Blue 2004
|
| 19th May 2015 8:56 pm |
|
|
mark c0
Member Since: 22 May 2015
Location: Essex
Posts: 60
|
whats the idea behind raising or lowering the suspension with the hazzard lights on? is it to hitch up a trailer easier?
does it use the air from the reservoir to raise it as obviously the truck is not running so neither is the compressor.
many thanks
mark (newbie)
|
| 28th Jun 2015 8:56 pm |
|
|
milkbottle
Member Since: 28 May 2015
Location: Surrey
Posts: 133
|
Hmmmm. Mine does the follow me home lights but it won't change to the boot open mode.
Handbook only shows the three modes and not the boot opening thing 
Can it be done on my fob? Series 2a V8 killed it
Series 3 ex coastguard
110 HiCap
110 rebuilt from pickup to 5 seated hardtop...got that one in a feature of LRO!!!
Disco 300tdi. White
Disco 300tdi. Iceland and back. What a trip and no frozen drumsticks!
P38. Loved that car. Still miss it.
MGZS 180 major smiles for miles. Gone.
D3...LED bulbs in and out. EGR blanked. Geoff flushed and serviced
MG TF - bought for SWMBO. She doesn't like it. Shame. To sell or not to sell.
Triumph Thunderbird 1600 - awesome
|
| 7th Jul 2015 2:58 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
yes, go to your boot with your keys, hold the LR button down for 5 seconds, then keep it held down whilst opening the top tailgate.
release the LR button and thats it. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 7th Jul 2015 3:02 pm |
|
|
milkbottle
Member Since: 28 May 2015
Location: Surrey
Posts: 133
|
 Will give it a go!! Cheers Bodsy Series 2a V8 killed it
Series 3 ex coastguard
110 HiCap
110 rebuilt from pickup to 5 seated hardtop...got that one in a feature of LRO!!!
Disco 300tdi. White
Disco 300tdi. Iceland and back. What a trip and no frozen drumsticks!
P38. Loved that car. Still miss it.
MGZS 180 major smiles for miles. Gone.
D3...LED bulbs in and out. EGR blanked. Geoff flushed and serviced
MG TF - bought for SWMBO. She doesn't like it. Shame. To sell or not to sell.
Triumph Thunderbird 1600 - awesome
|
| 7th Jul 2015 4:26 pm |
|
|
milkbottle
Member Since: 28 May 2015
Location: Surrey
Posts: 133
|
And it works!! Must unlock car first or the alarm goes off as you go into the boot  Series 2a V8 killed it
Series 3 ex coastguard
110 HiCap
110 rebuilt from pickup to 5 seated hardtop...got that one in a feature of LRO!!!
Disco 300tdi. White
Disco 300tdi. Iceland and back. What a trip and no frozen drumsticks!
P38. Loved that car. Still miss it.
MGZS 180 major smiles for miles. Gone.
D3...LED bulbs in and out. EGR blanked. Geoff flushed and serviced
MG TF - bought for SWMBO. She doesn't like it. Shame. To sell or not to sell.
Triumph Thunderbird 1600 - awesome
|
| 7th Jul 2015 8:04 pm |
|
|
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
|
mark c0 wrote:whats the idea behind raising or lowering the suspension with the hazzard lights on? is it to hitch up a trailer easier?
does it use the air from the reservoir to raise it as obviously the truck is not running so neither is the compressor.
many thanks
mark (newbie)
No the suspension compressor runs if needs be even with ignition off.
I use it for washing the car; raise up to wash under car and arches etc then drop it down to reach roof easier
|
| 7th Jul 2015 8:13 pm |
|
|
mark c0
Member Since: 22 May 2015
Location: Essex
Posts: 60
|
Do you have to have the hazard lights flashing all the time to be able to do this feature then?
|
| 7th Jul 2015 11:19 pm |
|
|
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
|
Unfortunately yes hazards have to be on
|
| 7th Jul 2015 11:57 pm |
|
|
