Member Since: 15 Nov 2012
Location: Surrey
Posts: 190
Ignition Feed
HI, I am looking for a ignition feed under the bonnet to connect to the relay for a second battery charging system? Any pointers?
Huggs.Huggs.
D4 XS
D3 HSE(SOLD)
side steps, EGR blanked,3 flash +Clock Move
D4 XS 2012 For sale
D4 HSE 2015
V8 Upgrade Front brakes (AF)
155000 mile+ club
RAI
16000 lb winch
D4 As it comes...
Hampshire & Berkshire 4X4 Responder
Normally a split charge relay is a voltage sensing relay, it detects the increase in voltage from the alternator to above the threashold and the relay is triggered ?
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
12th Aug 2017 3:00 pm
Huggs153
Member Since: 15 Nov 2012
Location: Surrey
Posts: 190
Hi Beanie, I am linking the starter battery to a second bty and line fuses. The relay is rated at 100A 12v. The second bty will be used to power a winch on the odd chance its needed...A basic set up with a fuse either side of the relay. earth and ignition lead to the relay.
HuggsHuggs.
D4 XS
D3 HSE(SOLD)
side steps, EGR blanked,3 flash +Clock Move
D4 XS 2012 For sale
D4 HSE 2015
V8 Upgrade Front brakes (AF)
155000 mile+ club
RAI
16000 lb winch
D4 As it comes...
Hampshire & Berkshire 4X4 Responder
12th Aug 2017 3:06 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72787
Looking for same info. Had thought re VSR (after suggestions, didn't know it existed) but the output on the D4 runs below the trigger threshold for much, if not most, of the time.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
