Member Since: 27 Feb 2017
Location: London
Posts: 183
Under hood ACC ignition wire for DRL controller.
Hi everyone,
I am fitting one of them DLR controller's to have the LED strip on the disco 4 facelift lights, there's like 6 wires, one that goes to the headlights, one that goes to the LED strip, one for the indicators, 2 for the battery and one for the ACC ignition.
im ok with all except for the ACC ignition, i was wondering if there's anything under the hood that i can tap off?
took mine from the "Japanese" (aka Chinese or smog detector) connector just above the horns.
there are also vacant fuse slots that would do.
29th Sep 2017 12:34 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
ah, brilliant,
thank you so much! i will give it a go tomorrow and let you know.
thanks again!
29th Sep 2017 1:11 pm
JMack
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
I used the smog sensor as well, but fitted an in cab switch to turn them off as the smog sensor stays live for 'a while' after you turn the engine off and lock the doors. It also powers on when unlocking the doors, or even just opening a door when the lights have gone off anyway after the 5 or so minute they stayed on after turning off.
Got fed up of people telling me I'd "left my lights on".
read that in other posts ... but not true of mine.
29th Sep 2017 9:04 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8102
Mine stay on about 15 seconds which can be useful.It can when others can't,
It will when others won't,
It goes where others don't.
29th Sep 2017 9:51 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
Hardware17 wrote:
took mine from the "Japanese" (aka Chinese or smog detector) connector just above the horns.
there are also vacant fuse slots that would do.
hi, i couldnt wait till tomorrow so grabbed an LED torch light and went down, and saw the horn is behind the grille, however i found this plug. is the circled one in the picture the one you are referring to?
thank you !
29th Sep 2017 10:16 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
JMack wrote:
I used the smog sensor as well, but fitted an in cab switch to turn them off as the smog sensor stays live for 'a while' after you turn the engine off and lock the doors. It also powers on when unlocking the doors, or even just opening a door when the lights have gone off anyway after the 5 or so minute they stayed on after turning off.
Got fed up of people telling me I'd "left my lights on".
i would actually love for it to come on when you unlock the car, would be amazing. is the smog sensor the one i uploaded in the post like 2 mins ago?
i get the you left your lights on all the time, i have the home lights on, the amount of times ive been told is a joke. nice to reply with, they turn off automatically
not 100% sure as photo/my eyesight not good enough BUT mine was in a clip above the horns and worked fine.
tbh ... if mine came on with fob-press and stayed on 90seconds alter, I'd be happy,
29th Sep 2017 10:20 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
so i faced a problem, firstly i have this DRL controller,
i managed to locate the the LED strip wire in the headlight plug, however as you can see in the picture of the DRL controller, its got a red and a black wire on the bit you connect to the DRL, i didnt connect the black anywhere and just connected the red to the LED strip wire. then i powered it to the battery, using the black and red wires that have the round circles, and the LED strip came on, and remains on, the blue wire is for the ACC ignition which is what you all are helping me with. i find it weird that it comes on using just battery power, i would have thought that it would only come on after it got a signal from the blue wire. so i found on another post that you can use f9 fuse which is free, i tried that with no luck, the LED strip just stays on, if the smog plug everyone is referring is the one ive circled in the picture, i tried all the wires from that too with no luck. i am wondering whether it is a faulty DRL controller or could it potentially be because i havent connected the black wire of the DRL ( led strip). although im not sure where i would connect this. i dont think it can be because i havent connected the rest of the wires, which is yellow for the indicator and white for the dipped beam.
anyone can suggest anything?
thanks all!
29th Sep 2017 10:27 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
Hardware17 wrote:
not 100% sure as photo/my eyesight not good enough BUT mine was in a clip above the horns and worked fine.
tbh ... if mine came on with fob-press and stayed on 90seconds alter, I'd be happy,
ahh ok, no problem, i just added a clearer photo (not the clearest), but otherwise will upload one in the day light tomorrow.
I got the same DRL controller on mine (if fact I sell them too). I connected my blue wire to the fuse box, the halo's (DRLs), I got power from the fusebox for well over a minute after the keys have been taken out of the ignition.
Are you sure your leaving enough time?
I connected the red/black wires to the DRLs which you should really do, not sure if it switches the live or the earth !*D3 V8 SE Blue 2004 on LPG with Rock sliders, roof rack/Ladder, snorkel, 275/65x18 STT Muds, engine/G/box ally protection.
*D2 TD5 Epson Green 2002 Off roader (weekend toy)
*D3 V8 HSE silver 2004 on LPG (Wife's) SOLD
*Maserati Gran Turismo, the Gentlemans cruiser with a V8 soundtrack.
Youtube/trollmanRS
29th Sep 2017 10:46 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
ha, glad to know i use the same one!
hmm where would i connect the black wire? i know pin number 2 is the where the red wire goes. but not sure about the black? i have a super small unclear wiring diagram for the headlights so not sure. can you help?
would you know what fuse you used so i can eliminate that factor and know 100% im using the right connection for the blue wire.
i may have not left it on for longer, i will try a minute each tomorrow on each of the wires.
thank you so much for the help
29th Sep 2017 10:57 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8102
CJP2017 wrote:
Hardware17 wrote:
not 100% sure as photo/my eyesight not good enough BUT mine was in a clip above the horns and worked fine.
tbh ... if mine came on with fob-press and stayed on 90seconds alter, I'd be happy,
ahh ok, no problem, i just added a clearer photo (not the clearest), but otherwise will upload one in the day light tomorrow.
but thanks a lot for the replies.
Yes that's the correct socket, comes on when car is unlocked, goes off 10/12 seconds after, I've been using it for the last 3 years or so It can when others can't,
It will when others won't,
It goes where others don't.
30th Sep 2017 8:59 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
sounds like an issue with the black wire to me.
At the smog sensor connector, do you guys use the black/green wire or Orange/green ?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum