Afternoon all
Firstly Happy new year to all
After the EML came on as my other post a very kind member DARRIND read my codes this morning
The EML didn't show this morning by the way
As unsuspected I think the EGRs are on the way out as the codes below presented
P045 C-00 EGR B control circuit low
P045 D-00 EGR B control circuit high
When driving whilst plugged in they seemed to work in Ballance with each other and after clearing did not repeat
There was also P0101-27 mass or volume air flow-circuit range / performance - general electrical failure- circuit voltage above threshold
The D drives as it should
I've researched to see if I can see what the issue is i think it's the EGRs that are to blame and are possibly causing the P10101 code
If I'm correct I will blank and patch via a site sponsor
Could anyone explain in good old plain English the above to check I have made the correct assumptions and as the lights off do I see if it stays off before the blank/patch or is it only a matter of time for the EGR demise
Thanks
Phil
1st Jan 2018 2:48 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20733
Cheers DM
After the patch n blank would MAF be able to throw the EML on or is it plug in to monitor
I'm not good with the electrical side of things,old school spannering I'm ok with
1st Jan 2018 3:17 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
Hi Phil
Nice to meet you earlier and thanks for the coffee
Hi Darrin
Great to meet you too .
Good to talk LR with someone who understands .the wife don't understand
Anything I may help you with just about out
Once again many thanks
Phil
Bit of an update
done about a 1000 mls since with no further issues
did have suspension fault pop up last Sunday but cleared on restart
Had a new AMK comp about 18 months ago so should be ok , maybe a glitch as its no poped up again yet
still planning on the blank n patch when its milder
28th Jan 2018 7:34 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10372
Mine are blanked, but which side is B please?
28th Jan 2018 7:40 pm
Triplet3
Member Since: 26 Nov 2016
Location: Southampton
Posts: 320
Put the pipes back after you blank them. Will save you having to do it later on when they change the MOT laws in April 1995 Discovery 1 300TDI
2006 Discovery 3 TDV6 - Gone
1979 Series 3 109" - Gone
29th Jan 2018 12:49 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13670
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum