Member Since: 01 Dec 2018
Location: Stroud
Posts: 8
single injector removal/ seal replacement
Hi, i need to remove injector 1 on cylinder 1.
got engine chuff clearly coming from the base of injector topside of clamp. along with alot of of black carbon sludge.
is there a vid anyone can enlighten me to as cant find anything.
would just be good to know the procedure.
i have done alot of the mechanics on my truck just have never done this job
ive got new seal kit ready, from what ive read up its likely to be the copper seal?
thanks in advance for any help
2nd Jan 2019 8:05 pm
KostasA
Member Since: 23 Aug 2015
Location: nairobi
Posts: 286
use some penetrating oil to loosen it up. then use a long 13mm socket with an extension to fit it on the connection to the fuel line to try and move it around. that will help you to brake the carbon and remove it easily.
yes the seal is cooper and there is a posibility it is stuck inside the rabbit hole. use a long screwdriver to get it out.
good luck!!
2nd Jan 2019 8:17 pm
Discomadness
Member Since: 19 Jan 2015
Location: Caerphilly
Posts: 2256
Current : D3 2007 HSE - AKA the lemon
-beanie grille
-detango with led bulbs
-club body off rebuild. TWICE.
2nd Jan 2019 8:49 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Theres only two difficult bits
1, cleaning the injector seat face in the head
2, not losing the bloody leak off pipe clip!
2nd Jan 2019 9:43 pm
Paddington
Member Since: 30 May 2013
Location: Southampton
Posts: 280
Just had to do a injector seal on my d3 , to clean the washer seat I used a long extension bar and a long 8mm scocket with a clean rag with a squirt of brake and clutch cleaner on it worked a treat
Previous cars
Discovery 200 tdi
Discovery 300 tdi
Discovery td5
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum