Thanks guys. Just looking. I think I need a special thin spanner to remove the fan... is there a cheap one somewhere or do I need a full price tool?
19th Oct 2019 8:17 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8104
You also need a tool to stop the fan rotating while undoing the left hand thread, Advancedfactors sell them It can when others can't,
It will when others won't,
It goes where others don't.
20th Oct 2019 8:50 am
Geoff at Drym
Member Since: 18 May 2015
Location: Cornwall
Posts: 584
And make sure that you torque the pump bolts to the correct setting. I believe 27mn., but do check as there have been examples of overtightening resulting in casting failure, usually after cam belt replacement. You must fit a new oil crankshaft seal DRY and leave for apprx. 4 hours before restarting engine. Also fit a new crankshaft pully bolt.
Enjoy! 2007 Disco3 2.7 tdv6 SE
gvif with reversing camera
V8 brakes with new EPB module and shoes
Later D4 grille
Alive tuning remap
Mazda MX5
Ferguson ted20 tractor
Hyundai Getz 1.4 (wife's )
20th Oct 2019 10:48 am
Yargo
Member Since: 25 Dec 2020
Location: Europe
Posts: 326
Geoff at Drym wrote:
Later pumps have reinforced casting.
and they also uprated to thicker "star" to increase oil pressure. Most recent pump number is LR123716.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum