Member Since: 04 May 2014
Location: Lincolnshire
Posts: 25
D3 2009 HSE central locking remote receiver
Good evening guys...I would be really grateful for any assistance, I have been trying to fix an ongoing central locking fault, after going through lots of posts and comments i can't find what I'm looking for. My question is: I have tested for power to the unit and have a 12v power feed / supply (green and white wire) to my remote receiver but still no central locking so I'm looking to replace this part, I have found a second-hand remote receiver for sale with near identical part numbers etc, i'm thinking that the numbers will differ slightly, with manufacture date etc....is this a just plug and play without programming or will I need to get it programmed? Thank you for any help.
6th Nov 2020 6:38 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
One would think it has to match the key and frequency
7th Nov 2020 10:48 am
knuddy74
Member Since: 04 May 2014
Location: Lincolnshire
Posts: 25
So I've replaced the remote receiver with like for like...and still nothing!!! Anything else I can check before it has to go to LR? Any help is much appreciated 😀
11th Nov 2020 4:24 pm
Randylover
Member Since: 31 Jan 2011
Location: Staffordshire
Posts: 1172
I’m guessing you have already tried the green wire splice
If not search it on here there’s been lots that needed it as did I when my locking wouldn’t work
Hth
Andy05 TDV6,"S" in all colourcoded Zermatt silver,7 seats winter pack HK 6cd stereo,Dual climate,Xenons,
Mods:
Re-Con Engine,De-Tango,Reverse camera,Fog/DRl lights,Aux Battery, perm Aux socket in boot,LED Volt meters in roof panel,Built in tom tom, Strobes fitted in grille, Aux switches for trailer lights fitted in roof panel,Roof Rails,Grille conversion
11th Nov 2020 7:35 pm
knuddy74
Member Since: 04 May 2014
Location: Lincolnshire
Posts: 25
Thanks Andy....what year is yours? I have looked for the splice and couldn't find it, someone on here said as its a 2009 the wiring loom was changed so its not there. I have a 12v feed on the green and white wire to the remote receiver in the roof lining so I'm taking that as there's no break in the wire that feeds it....stuck as to what to do or check next 🤔
11th Nov 2020 7:48 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
Have you considered that the fob could be faulty or need reprograming. If you have a tool to reprogram the key try that. My Foxwell allows key programming
11th Nov 2020 10:27 pm
knuddy74
Member Since: 04 May 2014
Location: Lincolnshire
Posts: 25
Hi Globetrotter....I have a spare key that came with the car and it stopped working a while back, I sent it off for refurb and last night with my foxwell tried reprogramming the 2 keys. I put my original working key in first and then the refurbed one, it said run the car for 6 minutes, turning the refurbed key didn't start the car so i started it with my original key and ran the engine for 6mins and still the refurbed key doesn't work 🤔... can you remember any issues with your foxwell when you reprogrammed your keys?...thanks 😊
12th Nov 2020 7:43 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
My Foxwell is the NT510. All I did was follow the instructions on the screen. Both my keys I had taken to bits and soldered new batteries into them. I purchased new cases from eBay as I destroyed the old ones. I then set the Foxwell to program the keys and just followed what it said. Sorry I cannot help any more.
12th Nov 2020 9:05 am
knuddy74
Member Since: 04 May 2014
Location: Lincolnshire
Posts: 25
Thankyou...yeah I thought it would sort it, ill try again later 😀👍
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
