Member Since: 14 Apr 2009
Location: Sydney
Posts: 57
drivesafe wrote:
What sort of set up have you got and how do you use it?
its a surepower relay (ARB).
doesn't happen n the coast. just recently up in the blue mountains of a morning when the ext temp is less than 10c
I'll start monitoring the main voltage as well instead of only the aux, it maybe a faulty relay.
16th Jan 2010 11:37 pm
drivesafe
Member Since: 23 Feb 2006
Location: Gold Coast, Australia
Posts: 867
Do you have any idea of what the cut-in and cut-out settings are?2008 TDV8 RR Lux + 2009 D4 2.7
17th Jan 2010 1:56 am
oysbjerk
Member Since: 29 Dec 2008
Location: Norway
Posts: 29
Just for info, I haven't experienced that the D3 won't start, even at -24Celcius. But, it's clear that it struggles abit at these temperatures....just looking to optimize if possible
17th Jan 2010 6:00 am
Preacher
Member Since: 15 Aug 2009
Location: NE Victoria
Posts: 141
Hi guys
any information on fitting triple batteries ie the start battery plus 2 yellow tops
could anyone recommend a competant LR experienced auto elec in Victoria. I live in Wangaratta in the North East
thanks heeps
dj
10th Jun 2010 10:33 am
drivesafe
Member Since: 23 Feb 2006
Location: Gold Coast, Australia
Posts: 867
Why not do it yourself.
The D3 is the easiest vehicle I have ever worked on to run cables through.2008 TDV8 RR Lux + 2009 D4 2.7
10th Jun 2010 12:04 pm
Preacher
Member Since: 15 Aug 2009
Location: NE Victoria
Posts: 141
triple batteries
drivesafe wrote:
Why not do it yourself.
The D3 is the easiest vehicle I have ever worked on to run cables through.
just fitted a third battery (yellow top X 2) in front of the start battery. Simply made up a 3mm metal bracket to support it as the body dips down in that section and fitted a home made battery tie down setup. Used the 4 existing fixing points available.
Also removed both computors from behind the start battery to water proof them and the wiring loom (as I live on a flood plain and travel thru deep water when we're flooded in - which hasn't happened for a few years) With respect - to those who have given advice on how to do it - I don't really think you've pulled them 'right out' to seal them and seal them to the fire wall - because it's one hell of a job - far more detailed than reported - and they don't sit in a 'box' (although it may look like it until you strip them out) as has been suggested. I was most relieved when the motor started after its open heart surgery. On a brighter note - the pics and notes on the forum gave valuable hints on wiring set up to reinstall it all.
Still looking for a D3 auto elec in NE VIC OR Albury NSW OR around the Romsey Vic area to do all the electrical work at the one time
thanks
dj
27th Jun 2010 2:25 pm
Preacher
Member Since: 15 Aug 2009
Location: NE Victoria
Posts: 141
Drivesafe
I might just do it myself after all.
These are my parameters.
I have 2 yellow tops for under the bonnet (one already physically fitted - but not wired up as detailed earlier) the other will go in the normal 2nd battery spot on drivers side.
I need at least 2 12 volt points in the back and another in the middl3e seat area.
I have a small 12ft offroad van fitted with 2 batteries in tandem.
I therefore need to connect up all 4 extra batteries and charge them from the vehicle, hopefully you can help me out with this.
I'm a novice on installation of electronics
Thanks for your help
dj
17th Sep 2010 1:00 pm
drivesafe
Member Since: 23 Feb 2006
Location: Gold Coast, Australia
Posts: 867
Hi Preacher, take some pictures of how you have your batteries mounted and post them up here.
I can take it from there and talk you through an installation.
This is more like an plumbing job than an electrical job. You don’t even need a multi meter, just some basic handyman tools.
Lets see how you go!2008 TDV8 RR Lux + 2009 D4 2.7
17th Sep 2010 5:55 pm
Preacher
Member Since: 15 Aug 2009
Location: NE Victoria
Posts: 141
Click image to enlarge
20th Sep 2010 12:18 pm
Preacher
Member Since: 15 Aug 2009
Location: NE Victoria
Posts: 141
Click image to enlarge
20th Sep 2010 12:20 pm
Preacher
Member Since: 15 Aug 2009
Location: NE Victoria
Posts: 141
Click image to enlarge
sorry I had to do this the long way but at least you can see - 1st 2 pics my van, last one the disco
dj
20th Sep 2010 12:22 pm
drivesafe
Member Since: 23 Feb 2006
Location: Gold Coast, Australia
Posts: 867
OK Preacher, first off, which one of my kits do you have and can you take a few more pics of your draw bar and around the front of the CT boot.
Also, is the second battery to be used for winching?2008 TDV8 RR Lux + 2009 D4 2.7
20th Sep 2010 1:44 pm
Preacher
Member Since: 15 Aug 2009
Location: NE Victoria
Posts: 141
drivesafe wrote:
OK Preacher, first off, which one of my kits do you have and can you take a few more pics of your draw bar and around the front of the CT boot.
Also, is the second battery to be used for winching?
I don't have one of your kits - yes the second and third battery will be used for winching, duel fridges, extra 12v points inside etc
Pictures follow
dj
23rd Sep 2010 6:51 am
Preacher
Member Since: 15 Aug 2009
Location: NE Victoria
Posts: 141
Click image to enlarge
23rd Sep 2010 7:15 am
Preacher
Member Since: 15 Aug 2009
Location: NE Victoria
Posts: 141
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
