RyanR
Member Since: 29 Apr 2018
Location: Nova Scotia
Posts: 46
  
|
I have just had the rear propshaft replaced with a new GKN. Previous one developed heavy vibrations shorty after replacing just the center bearing. Now with the new shaft I am getting a rumbling/vibration but only between 50-65 mph. Operating smoothly before and after these speeds.
Any suggestions on where to start looking? Don't believe there is anything that can be adjusted. Bolts are torqued to spec.
|
 9th Oct 2023 8:06 pm |
|
|
disco chris
Member Since: 25 Apr 2022
Location: London
Posts: 246
 
|
Only thing I would say is give the new rear propshaft a once over, make sure all looks normal and everything installed correctly. If nothing obvious, I'd suggest your noise is coming from somewhere else... could be a long list of potential culprits
Diffs
Gearbox
Transfer Case
TC (possibly)
Tyres
|
| 9th Oct 2023 9:34 pm |
|
|
