Member Since: 06 Apr 2016
Location: Cornwall
Posts: 545
3D printed SatNav "Bezel/Shroud" for conversion project?
Hi,
Before I set about making one, has anyone made a 3D printed should "adapter" for converting the standard hole to accept a 7in CartPlay jobber?
As you may know, on a SatNav car if you pull of the centre dash facia, there is a "big hole" in that part. The SatNav remains in place and can be removed easily enough. Attached to the Sat Nav is a clipped on "should" that also houses the buttons and an electronics board.
What Im after is a version of that should that fits to the centre facia as per the original but is then "flat" on the back so I can fix my chepo (but rather nice) SatNav to that?
In the time before 3D Printing, id just buy should off a knackered sat nav and cut it down, or even a cubby of a lower spec D3. Still might but I have a printer so will go that route unless I fail. (PS I dont really want to cut the original sat nav should up "just in case".)
Any exisitign models would be a great head start.Disco 3: Lotus Elise S1: Ferguson T20: Audi A2
12th Nov 2023 2:14 pm
TheWojtek
Member Since: 23 Apr 2016
Location: Poznan, Poland
Posts: 82
It fits pretty well, all the original sat nav fittings are removed. This fits into the center dash cover. I hot-glued mine in place for the trials and im gald I did as the actual unit turned out to be a duffer in use so it all got removed without damage. Its a shame as it was great when it worked and the fitting was pretty good too. Still its a learning.
Note the posted design is simplified from the one in the slicer picture as it was easier to fit up.
Once I have a new unit and worked out some kinks ill post about the overall build, but here's the bezel anyway. next to the original.
Click image to enlarge
Disco 3: Lotus Elise S1: Ferguson T20: Audi A2
19th Nov 2023 2:42 pm
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 695
Awesome, thanks for sharing.
19th Nov 2023 11:50 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2889
Nice work
If you want to get to a more OEM look on the plastic try vapour smoothing the surface to loose the build linesMust stop buying shiny toys....
20th Nov 2023 9:38 pm
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 695
I just started a test print using PLA, let you know in 6hrs how it goes .
My laptop decided to install updates when the print was at about 95%, no matter was enough to get an idea on how it would fit.
Needs some adjustment to fit a non sat nav vehicle but otherwise looks good and factory.
4th Dec 2023 4:24 am
carbore
Member Since: 06 Apr 2016
Location: Cornwall
Posts: 545
I tweak this to make it a bit thinner and wider aperture for the Capuride 2.5HD unit which is the one I have.
I also uploaded an adapter I made so that I can fit a USB socket into one of the holes for the power sockets. The Cable goes the unit enclosed in the dash and you can plug a USB phone cable into the female end.
Ill try to grab some photos and do a proper post of this once I know its working well.Disco 3: Lotus Elise S1: Ferguson T20: Audi A2
11th Dec 2023 9:15 pm
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 695
What program are you using for design ? , i need to change a few dimensions but not familiar with editing STL files.
13th Dec 2023 9:20 am
carbore
Member Since: 06 Apr 2016
Location: Cornwall
Posts: 545
Hi, sorry im slow.
Its designed in Fusion 360, I have the personal (free) edition.
I added an export of the Fusion file to Thingiverse.Disco 3: Lotus Elise S1: Ferguson T20: Audi A2
20th Dec 2023 10:45 pm
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 695
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
