|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
  
|
Thats quite a smart idea 
Im making use of an old data card ..saves on using yet another USB slot G4 Gone ...but not forgotten
|
 5th Dec 2008 9:48 pm |
|
|
Murdered Out
Member Since: 28 Nov 2008
Location: AZ
Posts: 19
|
lucky me my pc has 8 USB slots
If anyone has AT&T they have a FREE version of them if you currently have a data plan/ iphone
http://www.wireless.att.com/cell-phone-ser...sku3020359 From RRS side
|
| 5th Dec 2008 10:05 pm |
|
|
happymug
Member Since: 18 Nov 2008
Location: UK
Posts: 46
 
|
Murdered Out wrote:I found this earlier, it seems like a perfect way to get free Internet. You just pull your sim card out and slide it into it and then plug the module into a USB port. If my iPhone could tether I'd do that but they don't unless you unlock it.
Take care - only "free" if your mobile contract has data included in your bundle. You will also need an HSDPA enabled sim and be on a network with HSDPA (or at least 3G) . If you have these then yes "free" as long as you stay in your bundle limits. Not sure that the hardware is anything special though - I would suggest a PAYG mobile broadband USB modem. You can get them from £40 from "3" who I reckon have the best mobile data network and are also aggressively extending their HSDPA coverage (they refer to it as Turbo). Depends of course where you are as to how good your coverage is.
http://threestore.three.co.uk/payg/?modem=1 (57) 2008 HSE
|
| 5th Dec 2008 10:46 pm |
|
|
Murdered Out
Member Since: 28 Nov 2008
Location: AZ
Posts: 19
|
yeah I understand, 99% of AT&T iphone users have the data plan already, and 3G. AT&T in the US has coverage everywhere you go. From RRS side
|
| 5th Dec 2008 11:00 pm |
|
|
|
|
luciogodoy
Member Since: 14 Apr 2008
Location: Windsor - UK
Posts: 356
 
|
Hi wiggs;
I am very impressed with your determination and skills, well done. This is what I call hacking, perfect.
I was looking through the posts, and your idea may solve some of the other issues/hacks we have been doing with the DVD and the reversing camera.
If the 4xwire flat ribbon cable that goes to the screen could be intercepted by your relay board and instead of the computer interface we had video source either from the camera or DVD, do you think this could work.
I managed to wire my DVD to the Sat screen, but it is a bit of a pain to touch the special place on the screen for 5 seconds, then 753 blah blah, your relay/switch is much better.
What do you think?
Thanks
Lucio I'm riding a R1250GSA Triple Back
Previous love: Disco 3 HSE MY07, D4 heated Steering/W, D4 rear cluster, D4 extended roof rack, D4 grille & air grille, D4 rear bumper, colour coded arches + front bumper, side-steps, Webasto timer/ remote control, De-Tangoed Xenon headlights + HID, LEDs all around, reverse CAM (RR hack) + brightness, DLR LEDs, 3-click indicator, SatNav on the move, EGR's done, front/rear antiroll bar Polybush, gearbox pan/filter + oil mega-flush.
|
| 10th Dec 2008 10:18 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
|
No ..it wont work 
The 4 wires im interupting are just from the touch screen overlay ...all they do is give you a co-ordinate when you touch the touch screen .
These then get converted to a usb signal through the little circuit board G4 Gone ...but not forgotten
|
| 10th Dec 2008 3:24 pm |
|
|
Murdered Out
Member Since: 28 Nov 2008
Location: AZ
Posts: 19
|
luciogodoy wrote:
I managed to wire my DVD to the Sat screen, but it is a bit of a pain to touch the special place on the screen for 5 seconds, then 753 blah blah, your relay/switch is much better.
What do you think?
Lucio
All you have to do is purchase a module that allows you to have video in motion so you dont have to do the 753 trick. From RRS side
|
| 12th Dec 2008 1:37 am |
|
|
|
|
