As always: comments, suggestions questions are very welcome.
12th Mar 2012 3:51 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Looking good
how much of the CCF can you edit ?G4 Gone ...but not forgotten
12th Mar 2012 4:00 pm
nickprice
Member Since: 01 Mar 2011
Location: Den Haag
Posts: 316
Excellent stuff! Looking forward to the update!
12th Mar 2012 4:04 pm
SteveMfr Site Sponsor
Member Since: 11 Jan 2011
Location: Strasbourg
Posts: 200
wiggs wrote:
how much of the CCF can you edit ?
A complete list will be out with the update - shortly.
There will still be a need (or niche?) for Colin's products tho.
12th Mar 2012 4:13 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
im still waiting to test a D4 one for you G4 Gone ...but not forgotten
12th Mar 2012 4:16 pm
SteveMfr Site Sponsor
Member Since: 11 Jan 2011
Location: Strasbourg
Posts: 200
ASAP... And that is a promise!
12th Mar 2012 4:18 pm
SteveMfr Site Sponsor
Member Since: 11 Jan 2011
Location: Strasbourg
Posts: 200
Another
20th Mar 2012 7:04 pm
Black_64
Member Since: 21 Feb 2012
Location: Limburg
Posts: 47
It look's that the IID Tool is going the right way.
I can't wait to test. 2006 Discovery 3 TDV6 Buckingham Blue -- IIDTool V3.0
Last edited by Black_64 on 23rd Mar 2012 7:09 pm. Edited 1 time in total
20th Mar 2012 7:52 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6272
Steve
When do you guys plannin on having D3 kit with full options availale?
Cheers
20th Mar 2012 7:58 pm
SteveMfr Site Sponsor
Member Since: 11 Jan 2011
Location: Strasbourg
Posts: 200
The scheduled completion date is 3rd quarter of this year. At the rate Christian (chief engineer) has been going, though, it might be sooner.
The IIDTool is updatable too. There is a USB connector which will allow any newer firmware version to be installed quickly and easily. If you buy now you'll end up with the same bit of kit as at the end of summer. www.gap-diagnostic.com
So, are you saying to buy the Range Rover L322 - 2002 - 2005 version now and it can be updated to the D3 later? If what is thew cost?Mark.
2006, D3 SE Auto - gone but not forgotten.
2014 BMW 530d M Sport Tourer.
1977 Triumph Spitfire 1500
_________________________________________________
Disco Picture Website Here
21st Mar 2012 7:50 am
kiwirich
Member Since: 02 Oct 2011
Location: Sydney
Posts: 99
Seriously simple to use
Hi Steve,
I used mine again on the weekend.........
I'd had a wee issue with the EPB Sticking & wanted to see the logged faults.
After 5 minutes of cursing & swearing about why the IID Tool didn't work, SWMBO came passed & said.............
"Didn't you say I had to use the cruise control to check that"......
She was right & no amount of pushing the Info button on the headlight stalk made any difference at all.
After using th ecorrect procedures, I had the faults read & cleared in under 2 minutes. 8) 8)
Excellent work
Thanks again for a seriously simple ( to use ) product.
Regards
Richard Carter
21st Mar 2012 9:44 am
SteveMfr Site Sponsor
Member Since: 11 Jan 2011
Location: Strasbourg
Posts: 200
Well, we are males. No multitasking, CRS, and no reading instructions. That's me!
(and there is a reason they are called SWMBO)
We are glad you are happy Rich
anglefire wrote:
So, are you saying to buy the Range Rover L322 - 2002 - 2005 version now and it can be updated to the D3 later? If what is thew cost?
No, if you have a D3, you buy an IIDTool (or EASControl) for a D3.
The development for all models we have avail at the moment is happening simultaneously.
The present functionality status can be checked at http://gap-diagnostic.com/products/iidtool.html
Scroll down and enter your vehicle + MY and the list appears. Click the red arrows for additional functionality on certain systems.
If you run out and buy one today, it will have an earlier firmware version. This fw does not have all the functionality that the updated fw will have - including CCF editing. When the new fw comes out, you go to the GAP website and download the firmware updater file. This is an exe file, so all you have to do then is plug your IIDTool in via USB and click on the file. It automatically finds the IIDTool and loads itself.
Member Since: 20 Oct 2009
Location: London, UK
Posts: 1318
Latest update, CCF and live data
Did update of latest firmware very easy and whow live data , espesially EGR data Well done GAP-diagnosticsA few mods... and keeping it all running...Faultmate MSV2
MY09EGR's blanked Thanks Bellautos, BAS
20th May 2012 7:23 pm
Black_64
Member Since: 21 Feb 2012
Location: Limburg
Posts: 47
Gap Diagnostics did release the V2.17 for the IID Tool.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
