- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
catweasel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
|
my upper glove box (you thought it was something else didn't you) vibrates like mad when going over corrugations and drives me nuts. it vibrates in an up down motion not in out and the hinges appear to be reasonably tight, anyone else experience this.
|
 7th Feb 2007 12:10 pm |
|
|
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
  
|
Mine's as tight as a duck's.................  “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
| 7th Feb 2007 12:39 pm |
|
|
TDMP
Member Since: 16 Jul 2006
Location: South Gippsland
Posts: 511
 
|
I am terribly disappointed by the misleading subject name of this thread...
(and the only rattle I’ve been able to produce in the D3 so far was from my teeth - during a hill climb  ) Is God willing to prevent evil, but not able? Then he is not omnipotent.
Is he able, but not willing? Then he is malevolent.
Is he both able and willing? Then whence cometh evil?
Is he neither able nor willing? Then why call him God?
(Epicurus BC 341-270)
|
| 7th Feb 2007 10:24 pm |
|
|
Glymmer_Man
Member Since: 08 Mar 2006
Location: Sunny Downtown Sydney. I wish it were raining.
Posts: 319
|
catweasel wrote:my upper glove box (you thought it was something else didn't you) vibrates like mad when going over corrugations and drives me nuts. it vibrates in an up down motion not in out and the hinges appear to be reasonably tight, anyone else experience this.
My first Disco was like this too.......... I couldn't manage to fix it. The vent and surround is what appeared to cause the rattle in mine though. Check that out.
Second Disco is Top Notch!
|
| 7th Feb 2007 10:29 pm |
|
|
PCH
Member Since: 12 Jan 2005
Location: Anywhere but work
Posts: 812
|
Mines tight and no rattles.
Do you have to push the lid hard to get it to lock. I do otherwise it is still open.
Chris 2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
|
| 7th Feb 2007 11:34 pm |
|
|
catweasel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
|
Glymmer_Man wrote: The vent and surround is what appeared to cause the rattle in mine though. Check that out.
you can see the glovebox bouncing around.
PCH the glovebox shuts easily, might be something to tighten, will have another look.
|
| 8th Feb 2007 7:30 am |
|
|
LeighW
D3 Decade
Member Since: 31 Jan 2006
Location: Brisbane, AUS
Posts: 918
|
Gidday catweasel. I solved the problem of my upper box lid vibrating on corrugations by simply opening it. The design of the spring return means that it will return to the almost closed position and viola - no more annoying vibration.
The only thing against this 'solution' is that articles may try to leave the aforesaid receptacle in a unanticipated manner due to not being restrained. To solve this new problem we put every last map into the lower box and drove in sheer comfort.
Back in Brisbane and relatively smooth bitumen roads I went to open the bonnet next day and simply pressed the open lid home (although it would have been difficult to even notice it was open).
HTH, Leigh - and I have only the hold down brackets to fabricate and I will have finished MY sliding floor!! LeighW
The old girl is on her third engine...
* first ran a bearing (design failure in original engine)
* second had a failure of the water outlet on top of the engine (pls check yours)
|
| 8th Feb 2007 12:56 pm |
|
|
Glymmer_Man
Member Since: 08 Mar 2006
Location: Sunny Downtown Sydney. I wish it were raining.
Posts: 319
|
catweasel wrote:Glymmer_Man wrote: The vent and surround is what appeared to cause the rattle in mine though. Check that out.
you can see the glovebox bouncing around.
PCH the glovebox shuts easily, might be something to tighten, will have another look.
Mine moved around, I just found the noise was actually coming from the vent, is all.
I hope you can get it sorted out! I hate rattles and squeaks in cars!
|
| 8th Feb 2007 9:59 pm |
|
|
catweasel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
|
GM did not intend to offend (if I did) but a jack hammer moves less. I am going over the same route this weekend and will try the open glovebox idea. I have the noise on video and if I ever get off my  I will put on the net. failing a fix I will remove the f ing thing
|
| 9th Feb 2007 8:03 am |
|
|
Jamo
Member Since: 18 Jan 2006
Location: Esperance, Western Australia
Posts: 1170
|
My CD's sometimes rattle around, but I've had no other rattles from that location. Have a nice day!
2010 Cayenne Diesel with PASM & Off Road Pkg
2005 HSE D3 (Sold)
|
| 10th Feb 2007 1:31 pm |
|
|
Swifty
Member Since: 13 Sep 2006
Location: here
Posts: 245
 
|
TDMP wrote:
I am terribly disappointed by the misleading subject name of this thread...
(and the only rattle I’ve been able to produce in the D3 so far was from my teeth - during a hill climb )
I share your feeling of being let down TDMP.
However, whilst I do not have a "vibrating Box" of my own (well not since the court order!) could it be the inner for the box more than the lid/cover or a surrounding lip/bevel/seal to the dash? I have seen this beofe on other vehicles...
|
| 11th Feb 2007 1:27 am |
|
|
catweasel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
|
had a new frame which has the hinges in it installed on Friday and no more rattles at this stage but has not been thoroughly tested, so fingers crossed  pity the lower glove box light no longer works 
|
| 22nd Oct 2007 6:56 am |
|
|
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
|
Have fun changing the globe CW.   “There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
| 22nd Oct 2007 7:24 am |
|
|
catweasel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
|
already changed the globe (just remove the switch  ) and checked the connector and all ok. probably left something else unplugged which the dealer can rectify on my next visit for an out of balance aircon fan
|
| 22nd Oct 2007 7:32 am |
|
|
Jamo
Member Since: 18 Jan 2006
Location: Esperance, Western Australia
Posts: 1170
|
1000km out of warranty and my lower glovebox handle starts to break! A spring fell out! cest la vie! Have a nice day!
2010 Cayenne Diesel with PASM & Off Road Pkg
2005 HSE D3 (Sold)
|
| 22nd Oct 2007 1:40 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
