Member Since: 23 Nov 2006
Location: Brisbane
Posts: 189
Snork^H^H^H^H Raised air intake
I've done some searching and I can't find what I'm looking for - although there are a few clues.
I have a V8, so the safari snorkel is not an option.
I appreciate the benefits of dust reduction - living in Queensland it is a bit of an issue, but I don't follow too close so it's not a huge concern.
I do have to cross the occasional river and am worried I'll find a hole and end up deeper than I expected. A snorkel sounds like suitable insurance.
Just where are the holes in the G4 snorkel? I've seen photo from nwoods showing some gaffer tape on the outside sealing a hole. If there somewhere else? I read about a perforated tube in a search which sounds alarming.
Also, I read that the snorkel may or may not need to be removed to allow the bonnet to open fully. Which is correct?
I think I have read that the LR raised air intake is made by Mantec.
I also seem to recall that there is a tube from the side air intake to some airbox in the engine bay that has drain holes to get rid of water that made it into the air intake... 2006 Zermatt Silver TDV6 'SE' Auto, Mantec sump guard, Frontrunner roofrack, Lightforce 140s, split charge system and... a Jetboil.
Powered by
11th Mar 2007 9:57 am
300+
Member Since: 23 Nov 2006
Location: Brisbane
Posts: 189
Disco Dog wrote:
Hi Steve,
Just been out and had a look at my G4.
Don't know who made the snorkel as it is Land Rover branded, but the bonnet opens fully, no problem.
Don't know what you mean about holes. Can you elaborate?
Will try and find out who made the snorkel.
John
Thanks for the info on the bonnet - I can't remember where I read that one.
This post also gives some more info:
http://www.disco3.co.uk/forum/topic4071.html?p=58985 2006 Zermatt Silver TDV6 'SE' Auto, Mantec sump guard, Frontrunner roofrack, Lightforce 140s, split charge system and... a Jetboil.
Powered by
11th Mar 2007 10:04 am
300+
Member Since: 23 Nov 2006
Location: Brisbane
Posts: 189
Thanks, not sure how I managed not to read that one...
Should I be siliconeing the perforations? Only the top ones (to allow water to drain out). Not sealing them?
Or not bothering with the snorkel as it leaks like a sieve?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum