Member Since: 22 Jul 2012
Location: Yorkshire
Posts: 73
Ride Height Sensor Multiplug
Hi All
Had faultcode C1a07 a couple of times and this last time had another one pointing me in the direction of the front left sensor.
I have been out in the dark and pouring rain and given both a good dousing with WD40 with a hope it will get me to work and back tomorrow with a plan to do a bit better job at the weekend.
My gut feeling (from reading lots of posts on here and my own experience) is that a good clean and operation through the full range would help.
My question is that there looked to be a multiplug under the unit (It was dark and raining!!) - could that be taken off and WD'd and replaced without having to do any recalibration or anything?
Also could the whole unit be removed without a recalibration if the same unit was replaced?
I have a BAS Faultmate but that doesn't seem to have any recalibration capability?
Any help gratefully recieved as ever!!
ThanksSanity is just a form of madness favoured by the masses
I had the same on mine i replaced the ride hight sensors to start with, that lasted about a month, eventually tracked it down to coroded wires to the multi plug on the ofending sensor
You can get a repair kit from Landrover or you try here
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum