Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
You could have asked if anyone had the original loom and were not using it as they do come up on here quite often but i do admire what you are doing Discovery 3 se gone
Range rover sport supercharged here:)
5th Feb 2018 7:36 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13752
hi
ooooppps , didn't think of that
many thks and working it all out , by making the lead up with everything i can’t see it being any more than than £25
don’t know what an original lead would cost
in all fairness and must sound sad i really enjoy doing things like this
5th Feb 2018 8:15 am
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
You could have had my twin electrics for £50 as i changed mine to 13 pin but do understand the satisfaction of doing it yourself Discovery 3 se gone
Range rover sport supercharged here:)
5th Feb 2018 8:28 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13752
many thks,
however i do intend to remove the 12 n completely and put the wiring back as it should be, got to remove the insulation tape and see what they’ve done , so that if i do decide to refit the 12n loom i can indeed ask here first and will be just a plug and play installation whistle:
many thks once again and is appreciated
5th Feb 2018 8:44 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18479
Sorry I wasn't around to help more with this but it sounds like you are probably sorted 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
5th Feb 2018 9:30 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13752
hi martin
have sent u a PM
no probs at all, my main problem was actually finding the pins on there own that goes into the grey connectors for the 12 n and 12 plugs located inside the boot
think i will also make just the boot 12v port constant live , now i’ve got the split charge system , seeing ive got a constant live there and add an inline fuse
many thks
5th Feb 2018 9:38 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13752
hi
wished to update my post
finally , tracked down the terminals and wished to share the details so it may be of us to others
have enclosed the spec sheet of both make and female , i fitted the male connectors
they are called Yazaki ,
male connectors , part number 7114-4111-02
female connectors part number 7116-4111-02
now for the good bit , have tracked down the connectors fitted in the landies and linked in the complete catalogue
there is a crimp tool available from japan , called Japanese Hozan P-706 –
maybe others have already got them, am still looking for a UK supplier and will update the thread when i’ve found them, or maybe if someone would be so kind to post a pic and name up that’s crimps these terminals plse
well that’s my update and hope it will be useful to others , plse feel free to ask if i can be of any future help , along with Paul , who is very helpful via his ebay page
just nice being able to give a little back to the forum
Last edited by gstuart on 8th Feb 2018 9:12 pm. Edited 5 times in total
8th Feb 2018 7:15 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10414
cool, thanks very much
8th Feb 2018 7:25 pm
Hot Tub
Member Since: 15 Aug 2017
Location: Milton Keynes
Posts: 1071
They look like normal electrical crimp try an electrical wholesaler ask if they have crimpers to suit. Maybe look in RS components and Farnell catologue.
8th Feb 2018 7:30 pm
Batfink
Member Since: 31 May 2017
Location: Isle of Sheppey
Posts: 1510
I normally also add some solder when using crimps like that. Just like to add an extra level of making sure they stay connected. 2006 TdV6 HSE.
8th Feb 2018 8:06 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13752
this should inc better pictures ,
HOZAN P-706 Open Barrel Crimper terminals contacts JAPAN
also added some better picture of the terminals , i removed these so it showed how the crimps were done
8th Feb 2018 8:08 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13752
Pete K wrote:
cool, thanks very much
thks,
think i need to get out more as i enjoy a challenge and doing things like this
wished to make sure i updated this thread so should be useful for the future
8th Feb 2018 8:55 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13752
Hot Tub wrote:
They look like normal electrical crimp try an electrical wholesaler ask if they have crimpers to suit. Maybe look in RS components and Farnell catologue.
thks, haven’t found anything as of yet
8th Feb 2018 8:56 pm
Sulley
Member Since: 18 Oct 2017
Location: Essex
Posts: 5
Have you looked on Aliexpress or wish.com for the crimping tool. They take a while to arrive, but you never know. I was looking at a crimping tool with interchangeable heads, so one of those might cover what you are looking for.
8th Feb 2018 9:04 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13752
Batfink wrote:
I normally also add some solder when using crimps like that. Just like to add an extra level of making sure they stay connected.
have put a better picture of the terminals
is this what u mean about the solder , where i’m pointing to plse
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
