Member Since: 01 Feb 2013
Location: Miami
Posts: 5
Happy To be a BETA tester Colin
Let me know
15th Jul 2013 6:18 pm
ids
Member Since: 12 May 2009
Location: Herefordshire
Posts: 384
Any more joy with this or has your other new project taken up your time ?
if its not going to happen would you be interested in selling one of your Dev boards that had the resistors in -not bothered about the illumination which seemed to be the big issue at the time
ids
16th Aug 2013 6:42 am
BBS SPY Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
As it happens, my new 2010 RRS, which i got to help aid our developments has recently really helped this project immensely.
While we have a complete set of 2011 RRS wiring on the bench, for some reason we cannot fathom no matter how hard we try, using this to capture the LIN Bus traffic between the steering wheel and the Ipack and Body control has been a constant and on going problem that has been a significant factor in progression.
A week or two ago, i replaced the steering wheel and switches in my RRS with one that also had ACC and Flappy paddles, and while i was at it, i put in a small break out connector such that we could plug in and monitor / capture the LIN bus traffic.
This has since provided us with all the information we need and since that point we are now making quite good progress.
As everyone here knows, i now have spent a significant amount of time, money and effort on this and noting that the illumination aspect is something some may well not care about, if i cannot now sort this in a reasonable time, i may well release kits that do the conversion albeit at the loss of any background illumination and Paddle shift capabilities.
ATB
Colin
21st Sep 2013 7:02 pm
aljo
Member Since: 20 May 2007
Location: west sussex
Posts: 804
That would do me colin Last night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!
21st Sep 2013 7:06 pm
radders89
Member Since: 30 Aug 2010
Location: West Sussex
Posts: 1051
Ditto for me too Colin. Would be nice to have it illuminated but not a deal breaker by any means.
Good luck. MY15 D4 SDV6 HSE Corris Grey - Gone
MY05 D3 TDV6 SE Zambezi silver Auto Alpaca leather - Gone
MY02' Seat Leon 1.6s Metallic Black cloth trim with a hint of mould
Club Sandwich
Women... Can't live with em, can't kill em...
21st Sep 2013 7:59 pm
ids
Member Since: 12 May 2009
Location: Herefordshire
Posts: 384
Same for me. Need to get that D4 wheel fitted as the leather is soooo soft....
21st Sep 2013 8:49 pm
kieranreed
Member Since: 05 Jun 2013
Location: huntingdonshire
Posts: 5
How can i bye one
Hey ive fitted a d4 wheel in my d3 how can i get
One of your magic boxes
Thank you
Kieran reed
17th Oct 2013 10:53 pm
ids
Member Since: 12 May 2009
Location: Herefordshire
Posts: 384
Sadly the thread has been dragging on a bit too long....... I guess Colin is v busy
I'm just wondering if its worth rigging up a resistor ladder sub board then simply just bridging the switches over onto it. Not sure yet how doable this is. Need to sit and examine the diagrams again.
What's anyone else done? Anyone got some spare D4 switches?
Ids
18th Oct 2013 6:26 am
BBS SPY Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
A heads up chaps,
Yes i am indeed V Busy and things are certainly not getting any easier for me.
With this project and thread indeed dragging on now for way too long, we are now currently getting quotes in for the production of 50 sets of the latest PCB's i had designed, that although the existing combination of resistors and LED's ran too hot, would still work quite sucessfully without any background illumination as well as having the possibility to apply an external solution or some alternate LED's and resistors at some point in the future.
We are looking to have these produced with Gold Plated contacts so that the switch pads will not suffer from any future degridation and work just as the origionals do, and that the resistors we will need to hand solder onto them to produce the replacement resistor ladders will produce the requisite accuracy.
27th Oct 2013 7:15 pm
radders89
Member Since: 30 Aug 2010
Location: West Sussex
Posts: 1051
Colin
Stick me down for one please once you get it sorted.
MY15 D4 SDV6 HSE Corris Grey - Gone
MY05 D3 TDV6 SE Zambezi silver Auto Alpaca leather - Gone
MY02' Seat Leon 1.6s Metallic Black cloth trim with a hint of mould
Club Sandwich
Women... Can't live with em, can't kill em...
27th Oct 2013 7:19 pm
ids
Member Since: 12 May 2009
Location: Herefordshire
Posts: 384
Colin
Cracking news that its finally happening. Put me down for one too.......
Ids
27th Oct 2013 8:25 pm
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
time to dust off that D4 wheel I bought years back
please put me down for one and maybe 2 depending on the price
27th Oct 2013 8:39 pm
aljo
Member Since: 20 May 2007
Location: west sussex
Posts: 804
Put me done for one as well colin please Last night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!
27th Oct 2013 9:05 pm
Stu
Member Since: 08 Feb 2009
Location: Hampshire
Posts: 2423
Do these units exist?D3 HSE MY05 Auto
Expo Rack, Club MTR, LR Spots, A Bar, Light Guards, GNVP Sump Guard, GNVP Ladder, Cup Holders, RLD A Bar brackets. Disco3Club stickers, Aux power on Mod
9th Nov 2013 1:39 am
Stu
Member Since: 08 Feb 2009
Location: Hampshire
Posts: 2423
Just having looked at the title of this thread. I'm not fussed about the tiptronic bit, but is there a box to enable the main switches to work, ie cruise control and stereo control?D3 HSE MY05 Auto
Expo Rack, Club MTR, LR Spots, A Bar, Light Guards, GNVP Sump Guard, GNVP Ladder, Cup Holders, RLD A Bar brackets. Disco3Club stickers, Aux power on Mod
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
