Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > My Discovery 3

Reddahaydn's 2007 Disco 3 TDV6 Build Thread
Post Reply  Down to end
Page 2 of 2 <12
Reddahaydn
 


Member Since: 02 Mar 2015
Location: Melbourne
Posts: 38

Australia 2007 Discovery 3 TDV6 Base 7 Seat Auto Chawton WhiteDiscovery 3
progress

No photos but I did the trans fluid today, silicon intercooler hose (after the second LR one split), new heavy duty lower front control arms cuz the bushes were shagged, replaced the rear door hatch locking mechanism with the upgraded discovery 4 one and got another wheel alignment and reset the steering angle which fixed my HDC fault.

Also got a Nanocom Evolution to help out with diagnosing any further issues!

Turns out my EGRs are throwing a fault, but no warning light, so I'll be getting them blanked and the software over ridden next week. Softwares expensive tho!!! $600 Wow!
 2007 Disco 3 2.7 TDV6
LLAMS / 265/65/18 BFG ATs / Safari Snorkel / Spare wheel carrier / 100L Long range tank / Traxide SC40 dual battery isolator / Optima Yellow Top / Autologic Remap / Front Runner Slimline II Roof Rack / Cross drilled and slotted rotors and ceramic pads / Front Runner drawers / UHF / Rasta front skid plate / Waeco CF50 / Mitch Hitch / Tint / Parrot MKi9200 Bluetooth Phone & Audio 
 
Post #14953531st Jul 2015 10:44 am
View user's profile Send private message View poster's gallery Reply with quote
wcryer
 


Member Since: 27 Jan 2011
Location: Denver, CO
Posts: 35

United States 2008 LR3 4.4 V8 HSE Auto Chawton WhiteLR3

How are you liking the front runner with the new mount style? How is the wind noise? Were they much of a pain to get mounted? (I am debating ordering some to swap with my current rack mounts.
 08 LR3 HSE  
Post #155310730th Oct 2015 12:40 am
View user's profile Send private message View poster's gallery Reply with quote
Reddahaydn
 


Member Since: 02 Mar 2015
Location: Melbourne
Posts: 38

Australia 2007 Discovery 3 TDV6 Base 7 Seat Auto Chawton WhiteDiscovery 3
Frontrunner

Hey mate,
Front runner rack itself is solid as a rock. less flex than steel racks i've had one other vehicles, and being all bolted, less likely to fatigue as well.

To be honest mate, i don't think the rack mounts make any difference to the wind noise tho, the noise is due to the big square edges rack. I'm thinking of making up a custom wind deflector.
Wind noise is average but I can deal with it.

The hardest part mounting is the front doing up the bolts between the fins. but the new mounts do look much better.
Apparently rhino are doing a slimline rack now too - might have been better wind noise wise.

Since my last post I've taken the old girl on a 9000km round trip from Melbourne to Darwin towing a camper trailer. Was a bit floaty while towing which was annoying, but handled the corrugations no worries. Only issue was trying to run 32x50L fridges and a 90L fridge freezer through a traxide SC40 and optima yellow top. Kept flicking the circuit breaker as was drawing too much current for the little wire.

I'd had a small hum at 60-70kph and a bit of a knock in the front end, turns out one of the lower control arms bolts had come loose. ease fix.

https://fbcdn-sphotos-c-a.akamaihd.net/hph...18690f009c

https://scontent-lax3-1.xx.fbcdn.net/hphot...e=56B4AAF9

https://scontent-lax3-1.xx.fbcdn.net/hphot...e=56CAE9C6

https://scontent-lax3-1.xx.fbcdn.net/hphot...e=56CBDF78

https://scontent-lax3-1.xx.fbcdn.net/hphot...e=56C73184

https://scontent-lax3-1.xx.fbcdn.net/hphot...e=5685E7E3


https://fbcdn-sphotos-e-a.akamaihd.net/hph...35b5102483

https://fbcdn-sphotos-a-a.akamaihd.net/hph...44b9331dac

https://fbcdn-sphotos-h-a.akamaihd.net/hph...e549efa8f5

https://scontent-lax3-1.xx.fbcdn.net/hphot...e=56C9CA2A

https://fbcdn-sphotos-b-a.akamaihd.net/hph...ce144246cf

https://fbcdn-sphotos-b-a.akamaihd.net/hph...f9fe2fed1a
 2007 Disco 3 2.7 TDV6
LLAMS / 265/65/18 BFG ATs / Safari Snorkel / Spare wheel carrier / 100L Long range tank / Traxide SC40 dual battery isolator / Optima Yellow Top / Autologic Remap / Front Runner Slimline II Roof Rack / Cross drilled and slotted rotors and ceramic pads / Front Runner drawers / UHF / Rasta front skid plate / Waeco CF50 / Mitch Hitch / Tint / Parrot MKi9200 Bluetooth Phone & Audio 
 
Post #155311530th Oct 2015 1:15 am
View user's profile Send private message View poster's gallery Reply with quote
wcryer
 


Member Since: 27 Jan 2011
Location: Denver, CO
Posts: 35

United States 2008 LR3 4.4 V8 HSE Auto Chawton WhiteLR3

yea - ive thought about a custom wind fairing too. just havent had the time to get one mock up and made
 08 LR3 HSE  
Post #155312030th Oct 2015 1:38 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 2 of 2 <12
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site